FTDI Chip FT230XQ-R UART Interface 3MBd, 5 V, 16-Pin, QFN

  • RS Stock No. 757-0026
  • Mfr. Part No. FT230XQ-R
  • Manufacturer FTDI Chip
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

FT230X, FT231X, FT234XD - Full Speed USB to UART, FTDI Chip

The FTDI Chip FT230X and FT234XD are Ful Speed USB to basic serial UART interface devices. The FT231X is a Full Speed USB to Full Handshake UART interface.
They have a fully integrated MTP memory and an integrated clock circuit which requires no external crystal which helps to reduce external component count.
Capable of operating up to 3 MBaud, with low power consumption (8 mA), all USB to UART devices operate efficiently with USB host controllers. They use as little bandwidth as possible.
The FT230X includes the complete FT-X series feature set and enables USB to be added into a system design quickly and easily over a UART interface.

- Fully integrated MTP memory, clock generation, AVCC filtering, Power-On Reset (POR) and LDO regulators.
- Configurable CBUS I/O Pin Options.
- Asynchronous and Synchronous Bit Bang Modes.
- Operates at between +3.3 V and +5.25 V. A nominal operational mode current of 8 mA and a nominal USB suspend mode current of 125 μA.

Specifications
Attribute Value
Number of Channels per Chip 1
Standard Supported RS232, RS422, RS485, SIE, UART
Transmit FIFO 512B
Receive FIFO 512B
Maximum Data Rate 3MBd
Transmitter and Receiver FIFO Counter Yes
Mounting Type Surface Mount
Package Type QFN
Pin Count 16
Typical Operating Supply Voltage 5 V
Dimensions 4 x 4 x 0.75mm
Length 4mm
Width 4mm
Height 0.75mm
Minimum Operating Temperature -40 °C
Maximum Operating Temperature +85 °C
642 In stock for delivery within 4 working days
Price Each (In a Pack of 2)
SGD 2.965
(exc. GST)
SGD 3.173
(inc. GST)
units
Per unit
Per Pack*
2 - 8
SGD2.965
SGD5.93
10 - 38
SGD2.935
SGD5.87
40 - 98
SGD2.88
SGD5.76
100 - 198
SGD2.86
SGD5.72
200 +
SGD2.825
SGD5.65
*price indicative
Packaging Options:
Related Products
The NXP flash programmer FX is a high-speed, ...
Description:
The NXP flash programmer FX is a high-speed, all-in-one development interface which allows a PC access to the Background Debug Mode (BDM) or JTAG interface on Freescale Kinetis, Qorivva 55xx/56xx, ColdFire V1/+V1, ColdFire V2-4, HCS08, RS08, HC(S)12(X), DSC and HC16/683xx ...
A range of Ethernet communications controllers, transceivers and ...
Description:
A range of Ethernet communications controllers, transceivers and switching ICs. Line/Speakerphone circuitSerial InterfaceEnhanced voice switchingBackground noise monitoringTx- and Rx-gain programmableDigital volume control of Rx signalsDual softclippingLoudspeaker amplifier for loudhearing and handsfreeAutomatic ...
For Fault-Tolerant Applications:MAX3430: ±80V Fault-Protected, Fail-Safe, 1/4- Unit ...
Description:
For Fault-Tolerant Applications:MAX3430: ±80V Fault-Protected, Fail-Safe, 1/4- Unit Load, +3.3V, Transceiver MAX3080-MAX3089: Fail-Safe, High-Speed (10Mbps), Slew-Rate-Limited, TransceiversFor Space-Constrained Applications:MAX3460-MAX3464: +5V, Fail-Safe, 20Mbps, Profibus, Transceivers MAX3362: +3.3V, High-Speed, ...
Operate from a Single 3.3V Supply-No Charge Pump!Interoperable ...
Description:
Operate from a Single 3.3V Supply-No Charge Pump!Interoperable with +5V Logic8ns Max Skew (MAX3485/MAX3490/MAX3491)Slew-Rate Limited for Errorless Data Transmission (MAX3483/MAX3488)2nA Low-Current Shutdown Mode (MAX3483/MAX3485/MAX3486/MAX3491)-7V to +12V Common-Mode Input Voltage RangeAllows up to 32 ...