Eaton 355A British Standard Fuse, BS88/B3, BS88/B4, 415V, 111mm

Cooper Bussman's bolted tag fuse is essentially a fuse that is fitted with brackets, these brackets allow the fuse to be bolted onto a fuse holder. Predominantly, this type of fuse is used within installations as a "weak link". They are designed to break when a fault occurs, such as an overcurrent or short circuit - they are a safety and damage measure. Cooper Bussman's fuses are commonly found within a multitude of industrial applications, electrical equipment and wiring systems.

• The low-temperature rise enables the fuse to be suitable for high-density mounting applications
• Fuse links, specifically designed for the protection of applications
• Conforms to industry standards
• Low voltage fuse
• Suitable for three-phase applications
• Suitable for type 2 co-ordinated applications as defined in IEC 947-4
• Low power loss, typically 20% lower than the requirements of BS88

A slotted tag fuse is distinguished by the metal slotted tags that extend off the ends of the fuse. This tag can either enable the fuse to have an offset tag or be centred to the fuse. Predominantly, this type of fuse is used within installations as a "weak link". They are designed to break when a fault occurs, such as an overcurrent or short circuit - they are a safety and damage protection measure within electrical circuits.

This British Standard Fuse is an essential component in electrical systems. With a high rupture capacity, it protects equipment from overload situations. The fuse measures 138mm in length and has a diameter of 39mm, ensuring compatibility with various units. It is rated for 355A with a voltage capacity of 415V and complies with BS88 and IEC 269 standards, providing a dependable solution for power management applications.

• High rupture capacity improves safety during overload conditions
• Fits standard fixing centres at 111mm for straightforward installation
• Suitable for gG fuse applications and high-performance contexts
• Complies with BS 88 and IEC 269 standards for wide compatibility
• Compact dimensions of 138x39x39mm for efficient use of space
• High total arcing current at both 240V and 415V

• Utilised in industrial power distribution systems
• Protects motors and sizeable electrical equipment
• Incorporated in electrical panels for circuit protection
• Effective for automation controls and robotics
• Suitable for commercial and mechanical systems

Yes, it effectively manages high arc currents in overload situations.

Yes, it is rated for 415V, ensuring safe operation.

Yes, it can be easily mounted on a modular fuse block design.

It can be used alongside various Eaton fuse types for compatibility.

For products that are Customized and under Non-cancellable & Non-returnable, Sales & Conditions apply.

Eaton formerly known as Bussmann