Stieber ASNU 20 Sprag Clutch Bearing 20 mm ID 52 mm OD 21 mm Race Width

This image is representative of the product range

View all Sprag Clutch Bearings
Bulk discount available

Subtotal (1 unit)*

SGD372.88

(exc. GST)

SGD406.44

(inc. GST)

Add to Basket
Select or type quantity
Temporarily out of stock
  • Shipping from 04 May 2026
Need more? Click ‘Check delivery dates’ to find extra stock and lead times.
Units
Per unit
1 - 4SGD372.88
5 +SGD365.06

*price indicative

RS Stock No.:
146-5266
Mfr. Part No.:
ASNU 20
Manufacturer:
Stieber
Find similar products by selecting one or more attributes.
Select all

Brand

Stieber

Product Type

Sprag Clutch Bearing

Inside Diameter

20 mm

Outside Diameter

52 mm

Race Width

21mm

Series

63 ball bearing

Standards/Approvals

DIN 6885.3, DIN 6885. 1

RoHS Status: Exempt

Type ASNU is a roller type freewheel non-bearing supported. Bearings are required to support axial and radial loads. Lubrication and sealing must also be provided by the installation. A typical arrangement is to install this type alongside a bearing within the same location tolerances. The inner race is keyed to the shaft. The outer race has positive n6 tolerance, to give a press fit in a H7 housing. Additional side notches in the outer race provide for positive torque transmission. If the housing is to K6 tolerance, use of the notches is not necessary, but the housing must be strong enough to not expand after assembly. This design can accept an axial misalignment of inner and outer race of ± S/2.

Related links