INA HFL2530-L564 Sprag Clutch Bearing 25 mm ID 32 mm OD 30 mm Race Width

This sprag clutch bearing is designed for exceptional performance, featuring an inside diameter of 25mm and an outside diameter of 32mm. Known for its high torque capabilities, this bearing allows efficient torque transfer at a maximum of 66 Nm. With a robust race width of 30mm, it ensures reliable operation even under challenging conditions, functioning optimally at an overrunning speed of 5500 rpm.

• High dynamic load rating of 10600N for endurance

• Used for automation systems for enhanced performance

With a dynamic load rating of 10600 N and a static load rating of 14000N, this bearing ensures reliability under both dynamic movement and stationary conditions, catering to diverse operational needs.

This type of bearing is preferred when there is a need for smooth torque transfer in applications with reversed motion, such as in automated machinery or conveyor systems.

Routine inspections for wear and lubrication at regular intervals help maintain performance, ensuring that any contaminants are removed and that lubrication levels are adequate.

Yes, this bearing is designed to integrate seamlessly with various mechanical components, enhancing overall system efficiency in both electrical and mechanical applications.

INA from Schaeffler drawn cup roller clutches are one-way clutches comprising thin‑walled, drawn outer rings with a series of ramps on the inside diameter. There are also plastic cages, pressure springs and needle rollers. They can transmit high torques in one direction and are compact in a radial direction.;Drawn cup roller clutches give precise indexing, since the individual spring loading of the needle rollers ensures continuous contact between the shaft, needle rollers and ramps. They allow high indexing frequencies due to their low mass and the resulting low moment of inertia of the clamping elements. They also have a low overrunning frictional torque.

• Lower operating costs;• Reduced maintenance due to improved lubrication;• Lower heat generation;• Less noise;• Roller clutches, HF series, do not have a bearing arrangement and can only transmit torques;• Roller clutches, HFL series, have an integral plain or rolling bearing arrangement and can support torques and radial forces.

Drawn cup roller clutches can be used in various applications such as indexing clutches, back-stopping clutches and overrunning clutches. In these cases, the drawn cup roller clutch performs an overrunning or locking function.

KF - Plastic pressure springs