Asco Solenoid Valve E210C087SCA8, 2 port , NC, 230 V ac, 1/2in

  • RS Stock No. 488-716
  • Mfr. Part No. E210C087SCA8
  • Manufacturer Asco
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): GB
Product Details

Two-way, Stainless Steel N/C Valves

Two-way, stainless steel solenoid valves with zero bar minimum operating pressure, normally closed, threaded port connection.

Stainless steel body
Pressure not required for operation
Compact & lightweight
DIN plug connection
Ranging from -25 to +85°C
Can be mounted in any position

Note

Pressure ranges are for water and may differ for other media.

Compact solenoid valves suitable for most gas and fluid handling applications. Where practical, valves are shown with a schematic diagram showing the (circuit) function. The diagram is laid out so that the left-hand side of the diagram describes the valves operation when the coil is energised. When the coil is de-energised, the spring (or servo-assist) return controls the valve and is described on the right-hand side of the diagram. The 3 / 2-way designation indicates a valve with three ports and two modes of operation. It is normal practice to refer to 2 / 2-way valves as two ways. The port designations A, B, P, P1, P2 and R are used on the schematic diagrams and are marked on the valve bodies. Valve bodies are marked for a specific circuit function but can often be used for other functions. Reference to the schematic diagrams and technical specifications indicates the appropriate connections and pressure capabilities when an alternative circuit function is required.

Specifications
Attribute Value
Supply Voltage 230 V ac
Number of Ports 2
Operation Pilot
Connection 1/2 in G Female
Connection Size 1/2in
Default Valve Position NC
Suitable Applications Air, Inert Gas, Oil, Water
Type 2/2
Orifice Diameter 16mm
Body Material Stainless Steel
Maximum Working Pressure 9 bar
Operating Temperature Range -20 → +50 °C
Minimum Operating Temperature -20°C
Maximum Operating Temperature +50°C
Connection Gender Female
Maximum Opening Time 120ms
Series 210
Flow Factor Kv 3.4m³/h
Thread Standard or Connection Type G
Maximum Closing Time 120ms
1 In stock for delivery within 4 working days
Price Each
SGD 824.85
(exc. GST)
SGD 882.59
(inc. GST)
units
Per unit
1 +
SGD824.85
Related Products
Diaphragm valves for partially aggressive gaseous and liquid ...
Description:
Diaphragm valves for partially aggressive gaseous and liquid mediaSuitable for vacuumFor systems with low or fluctuating pressure conditionsDefined flow directionValve works without minimum pressure differentialElectromagnetically actuatedWith forced liftClosing dampingWithout tool, interchangeable magnet (Click-on®).
Insensitive to contaminated fluids except for sharp, solid ...
Description:
Insensitive to contaminated fluids except for sharp, solid and long fibresBody and lid material PVC; internal parts PVDF and PVC; EPDM sealsDouble seal to valve interiorNon-metallic valve internalsLockable manual overridePressure range: 0.5 to 6 barPower consumption 20VA (Inrush ac); 11VA/5W ...
Compact solenoid valves suitable for most gas and ...
Description:
Compact solenoid valves suitable for most gas and fluid handling applications. Where practical, valves are shown with a schematic diagram showing the (circuit) function. The diagram is laid out so that the left-hand side of the diagram describes the valves ...
The Buschjost 82400 series 1/2inG female solenoid valve ...
Description:
The Buschjost 82400 series 1/2inG female solenoid valve has a supply voltage of 230VAC. This 2-port NC position valve has a brass body with NBR seal with a clear compact design. It is ideally suitable for neutral gaseous and liquid ...