RS PRO Analogue Output, Isolating Signal Converter

  • RS Stock No. 218-4469
  • Manufacturer RS PRO
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): GB
Product Details

24Vdc Trip Amplifiers, Signal Isolator/Converters

Symmetric DIN rail mounting units with finger protected terminals designed for use in process control and instrumentation applications. Single or dual level trip amplifiers from a single Input.Each trip can be arranged so that the alarm condition can be above (high trip) or below (low trip) the set point, and that the relay can be either normally energised to de-energise in the alarm condition (fail-safe), or normally de-energised to energise in the alarm condition (non fail-safe).,signal Isolators/converter; this unit conditions the signal before sending it through an opto-isolated hybrid circuit. Input and output stages are power from separate secondaries of the dc/dc inverter to provide 3 port isolation

Input and output stages powered from separate secondaries of the supply transformer to provide 3-port isolation
Dual supply voltage operation
LED indication of "power on"

Specifications
Attribute Value
Input Range -250 → +250 V dc, 0 → 20 mA
Output Range 0 → 10 mA, 0 → 10 V dc
Supply Voltage 10 → 30 V dc
Mounting Type DIN Rail
Minimum Operating Temperature 0°C
Maximum Operating Temperature +50°C
Operating Temperature Range 0 → +50 °C
Termination Screw
14 In stock for delivery within 4 working days
Price Each
SGD 350.92
(exc. GST)
SGD 375.48
(inc. GST)
units
Per unit
1 +
SGD350.92
Related Products
The MYMGK***06 series are miniature Mono Block type ...
Description:
The MYMGK***06 series are miniature Mono Block type non-isolated Point-of-Load (PoL) DC-DC power converters for embedded applications. The tiny form factor measures only 9.0 x 7.5 x 5.0 mm. Applications include powering FPGA/CPU’s, Datacom/telecom systems, Distributed Bus Architectures (DBA), programmable ...
The MYMGK***06 series are miniature Mono Block type ...
Description:
The MYMGK***06 series are miniature Mono Block type non-isolated Point-of-Load (PoL) DC-DC power converters for embedded applications. The tiny form factor measures only 9.0 x 7.5 x 5.0 mm. Applications include powering FPGA/CPU’s, Datacom/telecom systems, Distributed Bus Architectures (DBA), programmable ...
The PSM-EG- switchgear modules are designed for industrial ...
Description:
The PSM-EG- switchgear modules are designed for industrial use and offer the following features:. Bi-directional conversion from RS-232 (V.24) to RS-232 (v.24), RS-422 (V11) and RS-485High quality galvanic isolation with 2.5kV test voltagePower supply voltage 24Vdc ±20%Alternative data line connection ...
From Phoneix Contact, the DIN-Rail mounted slim MINI ...
Description:
From Phoneix Contact, the DIN-Rail mounted slim MINI MCR-SL-R-UI resistance transducer converts potentiometer positions as a percentage to an analogue standard signal. If the potentiometer range cannot be utilized to the full, an externally accessible slide switch is used to ...