FTDI Chip 500mm, Male USB to Female Receptacle, Serial Cable Assembly

  • RS Stock No. 741-7070
  • Mfr. Part No. C232HM-EDHSL-0
  • Manufacturer FTDI Chip
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

USB 2.0 Hi-Speed to MPSSE Cable, FTDI Chip

The USB 2.0 Hi-Speed to MPSSE cables contain a small internal electronic circuit board, utilising the FTDI FT232H, encapsulated into the USB connector end of the cable. This chip handles all the USB signalling and protocols. The cables provide a fast, simple way to connect devices with 3.3 or 5V digital interfaces to USB.

Based on the single chip USB Hi-Speed FT232H device
USB 2.0 Hi-Speed (480Mbits/Second) and Full Speed (12Mbits/Second) compatible
Entire USB protocol handled on the chip – No USB-specific firmware programming required
USB Type A connector for direct connection to a host or hub
USB bus powered
Fully assisted hardware or X-On / X-Off software handshaking
Synchronous Serial (MPSSE) data rates of up to 30Mbps on JTAG, SPI and I²C
1kByte receive and transmit buffers for high data throughput
Transmit and receive LED drive signals
Adjustable receive buffer timeout
Support for USB suspend and resume
Low operating and USB suspend current Low USB bandwidth consumption
UHCI / OHCI / EHCI host controller compatible
Operating temperature range: -40 to +85°C
Cable length: 1800mm
FTDI’s royalty-free D2XX drivers eliminate the requirement for USB driver development in most cases

Specifications
Attribute Value
Connector A Male USB
Connector B Female Receptacle
Length 500mm
Cable Type USB
Temporarily out of stock - back order for despatch 09/04/2020, delivery within 3 working days from despatch date
Price Each
SGD 43.04
(exc. GST)
SGD 46.05
(inc. GST)
units
Per unit
1 - 9
SGD43.04
10 - 49
SGD41.67
50 +
SGD40.38
Related Products
Connection and extension lead with 2 9-pin DB9 ...
Description:
Connection and extension lead with 2 9-pin DB9 connections. Features and Benefits·All 9 wires are connected 1:1·Practical manual-locking screws·Abbreviations: Pl = plug, So = Socket.
Connects IBM AT to the modemPlug housing protected ...
Description:
Connects IBM AT to the modemPlug housing protected and coated with a special plastic for optimum strain relief to prevent cable damageCable with a 9-pin D-sub socket and a 25-pin D-sub plugExcellent protection prevents data loss and electrical interferencesHand attachment ...
QSFP+ (Quad Small Form Factor) high speed copper ...
Description:
QSFP+ (Quad Small Form Factor) high speed copper cable assemblies that use MADISON cable brand twin-axial (TURBOTWIN) copper cable and are able to support data rates of up to 10Gbps per differential pair and support Fibre channel, Ethernet and Infiniband ...
These QSFP cable assembly’s 38 position printed circuit ...
Description:
These QSFP cable assembly’s 38 position printed circuit card has been designed for the higher-bandwidth signal integrity requirements associated with 10Gb/s per channel transmission as well as accommodating the industry (SFF) defined EEPROM cable signature requirements. EMI termination is assure ...