FTDI Chip TTL-234X-5V-AJ for use with VDRIVE2 or VMUSIC2 Modules

  • RS Stock No. 150-1568
  • Mfr. Part No. TTL-234X-5V-AJ
  • Manufacturer FTDI Chip
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

TTL-234X Converter Cable provides a USB to TTL Serial interface with various end connectors.
On board FT234XD provides single chip USB to asynchronous serial data transfer interface.
Entire USB protocol handled by the electronics in the cable USB.
Connect directly to a microcontroller UART or I/O pins.
UART interface support for 7 or 8 data bits, 1 or 2 stop bits and odd / even / mark / space / no parity.

The TTL-234X-5V-AJ and TTL-234X-3V3-AJ cables are both terminated by a standard 3.5mm Audio Jack (AJ) connector. The difference between the two cables is that the TTL-234X-5V-AJ operates at +5V levels and the TTL-234X-3V3-AJ operates at +3.3V levels. On these cables the VCC power is not transferred.

Specifications
Attribute Value
For Use With VDRIVE2 or VMUSIC2 Modules
79 In stock for delivery within 4 working days
Price 1 Bag of 1
SGD 27.13
(exc. GST)
SGD 29.03
(inc. GST)
Bag(s)
1 +
SGD27.13
Related Products
The NCV7428 is a System Basis Chip integrating ...
Description:
The NCV7428 is a System Basis Chip integrating power supplies, undervoltage detection and a LIN bus transceiver typically for automotive Electronic Control Unit (ECU) applications. This device is AEC-Q100 qualified for automotive use. • Output supply voltage: +3.3V (NCV7428D13), +5V ...
The FT245B and FT245R are USB to parallel ...
Description:
The FT245B and FT245R are USB to parallel FIFO converter interfaces. Single chip USB to parallel FIFO bidirectional data transfer interfaceEntire USB protocol handled on the chip - No USB-specific firmware programming requiredFT245B USB compatibleFT245R USB 2.0 Full Speed compatibleFT245R ...
The FTDI Chip USB to UART cable provides ...
Description:
The FTDI Chip USB to UART cable provides a fast and simple way to connect devices with a TTL level serial interface to a USB. Each cable contains a small internal electronic circuit board, utilising the FT232R, which is encapsulated ...
The VNC2 is the second of FTDI’s Vinculum ...
Description:
The VNC2 is the second of FTDI’s Vinculum family of Embedded dual USB host controller devices. The VNC2 device provides USB Host interfacing capability for a variety of different USB device classes including support for BOMS (bulk only mass storage), ...