3M 6000 Series Half Mask Respirator Mask, Size L

Face hazardous environments head-on with this respirator mask from 3M. Its twin filters can be swapped out as needed, with an interchangeable cartridge and filter system providing protection against specific particulates and vapours. Because the respirator has a half-mask design, it's ideal for situations where you need to protect your airways without inhibiting your vision. A cradle head harness cuts out pressure points and achieves a non-slip fit.

• Can be used to protect against dust, powdered chemicals, organic vapours and acid gases with the right filter

• Chemical processing

You should change the filter when you notice it becoming more difficult to breathe. The respirator will still be protecting you at this point, but particulate build-up will restrict the free-flow of air through the mask.

The 3M 6000 series reusable half face respirator mask helps to provide protection against particles, gases and vapours when used with an approved cartridge or filter (NIOSH). It’s vitally important when in an environment that has harmful gases to uphold your safety and health. Coupling the dual airline respirator the correct cartridges/filters is vital and 3M are one of the best to ensure you uphold your safety and health through the 6000 series respirators. The respirator is reusable as the cartridges and filters can be exchanged or disposed once used to capacity.

The 6000 series respirator mask features twin lightweight filters, which can be specialised to suit your individual needs. Fitting the respirator is easy with two straps for a comfortable yet secure fitment, with adjusting straps to make sure it feel snug against your face. Its lightweight design makes this reusable respirator a favourite for professionals, to fit and dismount swiftly between jobs and the low profile design doesn’t obstruct the field of view.

Once the straps are adjusted the face piece is fully secured to the user’s face not allowing any harmful gases or particles to be inhaled. The 6000 series offers versatility for various environments and applications, with the approved cartridges and filters. This respirator and the cartridges/filters can be used in combination can be provide protections against a variety of hazards at concentrations up to 10 time the Permissible Exposure Limit (PEL). ;The 6000 Cartridges, 2000, 2200, 7000 or 5000 series filters are compatible with a 6200 respirator. They are all easily attached with a quarter turn twist on and off onto the face piece. ;Offering an alternative to the cartridges/filters the 6000 series an be used with high or low 3M Dual Airline systems, allowing flexibility and easy connections between both systems.

• Face Piece is made from soft, lightweight material;• Cradle head harness and easy to fasten neck strap;• Dual filter design and Airline system available;• Bayonet style fitting cartridges and filters;• Minimal obstruction to overall vision

• Construction;• Oil and Gas;• Industrial Maintenance;• Manufacturing

3M 6300 – 766-384 – Large;3M 6200 – 766-378 – Medium;3M 6100 – 766-362 - Small

Respirators allows for a higher filtration efficiency and better fit than standard face masks. All respirators must be approved by CE/NIOSH with an assigned approval code on each respirator if you’re unsure about a respirator or a standard face mask.

The NIOSH regulates the manufacture and testing of respirators, along with cartridges, filters and supplied air systems.

As particle filters load up with the contaminant they actually become a better filter. However, they become a harder filter to breathe through. The user will notice breathing becoming too hard and will then need to change the filter.

Meets the requirements of European Standard EN 140; 1998