3M Dust Filter for use with 3M 6000 Series Respirator, 3M 7000 Series Respirator

EN 143 Assigned protection factor as detailed in BS4275:1997 (APF)

The 3M™ 2135 is a soft, lightweight filter pack, which is designed for use with the 6000/7500 series half face respirators and 6000/7500 series full face respirators. They provide the user with a high protection from contaminated environments in a wide range of industrial contaminants. With a filter type of P3, it can protect you against solid and liquid particles. The bayonet fitting types allows each filter to be clicked in place for ease.

3M™ Particulate Filters 2135 offer P3 R protection against solid and liquid particles
Suitable for use with 3M™ all 3M™ Reusable Half and Full Face Masks featuring the Bayonet Filter Connection System
Bayonet fitting allows filters to be clicked into place for ease of fitting

• Demolition sites
• Sewage treatment plants
• Healthcare facilities
• Oil rigs

Applications

Filtered respirator facemasks are essential PPE for environments where particle ingress can be potentially hazardous to your health, such as gas, vapours or dust. They are often more suitable for heavy-duty tasks than disposable facemasks. Replaceable respirator particulate filters are graded in different ways to indicate their suitability for different applications, such as;

• A- Organic vapours with a boiling point more than 65°C
• B- Inorganic vapours
• E- Acid gases
• K- Ammonia and ammonia derivatives
• AX- Organic vapours with a boiling point less than 65°C

Always replace the filter if you find it difficult to breathe while wearing your respirator, as it's probably clogged and no longer performing effectively. You should also replace it after six months, however it's performing.

Correct use of respirators

When it comes to respiratory protection, the correct fitting and testing of your respirator is just as important as selecting the correct respiratory protective equipment for your working conditions. Be sure to follow all pertinent instructions and that health and safety best practice is adhered to at all times. Always be sure to use the correct filters for your environment, and make sure the replacement filters are changed as regularly as is recommended.