Arrow Electronics SmartEverything IoT Bluetooth Smart (BLE), GLONASS (GNSS), GPS, Near Field Communication (NFC), SigFox

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

Arrow SmartEverything IoT Development Board with SIGFOX

The Arrow SmartEverything Development Board is a flexible Arduino form-factor prototyping platform for Internet-of-Things (IoT) and M2M applications. SmartEverything combines SIGFOX, Bluetooth and Near-Field Communication (NFC) wireless technologies with GPS and a suite of embedded sensors. Atmel’s SAM D21 ultra low-power ARM® Cortex®-M0+ Microcontroller is used to integrate the featured devices.

SIGFOX connectivity is a particular highlight; the embedded Telit LE51-868 S Wireless Module gives design engineers access to the rapidly expanding SIGFOX cellular wireless network. Across the world millions of IoT devices already utilise the low-power connectivity SIGFOX provides. For SIGFOX network details please visit http://www.sigfox.com/en/#!/connected-world.

Key Features

• 12 months of SIGFOX network access included
• Features 3 wireless technologies – SIGFOX, Bluetooth and Near Field Communication (NFC)
• Arduino form-factor
• Fully supported by Arduino IDE
• Comprehensive sensor suite including a 9-axis Inertial Measurement Unit (IMU)
• GPS Module with embedded antenna
• Flexible power supply options – Can be powered by USB, Battery or separate Power Supply
• SWD Connector – Allows programming and debugging with SAM-ICE and ATMEL-ICE
• Pushbuttons
• RGB LED
• Dimensions - 53.34 x 68.58 mm

Featured Devices

• Microcontroller - Atmel SAM D21 32-bit ultra low-power ARM® Cortex®-M0+ MCU
• SIGFOX - Telit LE51-868 S SIGFOX 868 MHz Wireless Module
• Bluetooth - TDK SESUB-PAN-T2541 Bluetooth Low Energy 4.0 Module based on TI’s CC2541 BTLE System-on-Chip (SoC)
• Near Field Communication - NXP NT3H1101FHK NFC Interface IC, separate NFC Antenna included
• GPS/GNSS - Telit Jupiter SE868-A GPS/GNSS Module with Integrated Antenna, supports GPS, QZSS, GLONASS and is Galileo ready
• 9-Axis Sensing - ST LSM9DS1 iNEMO Inertial Module with 3D accelerometer, 3D Gyroscope and 3D Magnetometer
• Humidity and Temperature Sensing - ST HTS221 Capacitive Digital Humidity and Temperature Sensor
• Proximity and Ambient Light Sensing - ST VL6180X Proximity and Ambient Light Sensor, combines an IR emitter, range sensor and ambient light sensor
• Pressure Sensor - ST LPS25H MEMS 260-1260 hPa Absolute Barometer and Altimeter
• Cryptographic Authentication - Atmel ATSHA204A CryptoAuth Chip

Kit Contents

1 x Arrow SmartEverything Development Board
1 x Pre-Installed TDK SESUB-PAN-T2541 Bluetooth module
1 x Pre-Installed NFC Antenna

Note

USB Cable is not included

Wireless Modules - Arrow Electronics

Specifications
Attribute Value
RF Technology Bluetooth Smart (BLE), GLONASS (GNSS), GPS, Near Field Communication (NFC), SigFox
Kit Classification Development Board
Kit Name SmartEverything IoT
Discontinued product
Related Products
This USB stick and aerial brings radio to ...
Description:
This USB stick and aerial brings radio to your computer. Listen in to radio signals across a wide frequency range from 24 MHz to 1850 MHz. This covers FM radio, AM signals (although not AM radio) CW (Morse Code) and ...
The B-L475E-IOT01A Discovery kit allows users to develop ...
Description:
The B-L475E-IOT01A Discovery kit allows users to develop applications featuring direct connection of wireless IoT sensors to cloud servers. It is supported by a wide range of Integrated Development Environments (IDEs) including IAR™, Keil® and GCC-based IDEs. • STM32L475VG low-power ...
The UNI-SDK-RWD Evaluation Kit provides an evaluation platform ...
Description:
The UNI-SDK-RWD Evaluation Kit provides an evaluation platform for MicroRWD low-cost, pin-compatible and host command compatible Proximity Reader modules. Compatible with Proximity reader modules for Hitag 1, Hitag S256/2048, Hitag 2, Mifare 1k/4k/Ultralight, ICODE SLI and EM400X/4102 RFID tags and ...
The Microreader module is an RFID Reader System. ...
Description:
The Microreader module is an RFID Reader System. A Serial port RS-232 with TTL level, and USB data communications are supported.The Microreader can be controlled by sending commands to the serial communications interface or USB. It can also be controlled ...