Turck Inductive Block Proximity Sensor, 1/2-14 NPT, 20 mm Detection, NAMUR, 8.2 V dc

The Bi2 Turck Banner rectangular inductive sensor enables the accurate detection of metal objects, with a large detection range and extended switching distance.

Variable orientation of active face in 9 directions
Plastic, PBT-GF30-V0
Large detection range
DC 2-wire, nom. 8.2 VDC
Output acc. to DIN EN 60947-5-6 (NAMUR)
Terminal chamber

It's a cinch to suss out the location of metal objects with this proximity sensor from Turck. It's an inductive device that uses an electromagnetic field to quickly detect items made from aluminium, iron, copper or brass without making any physical contact. As a result, there's less risk of damage to delicate pieces. The sensor meets the demands of harsh industrial locations, thanks to its abrasion and corrosion-resistant PBT housing. A yellow LED keeps you in the know about the module's switching state.

• 9-position rotatable face for ease of use
• IP67-rated housing is dust-tight and protected against immersion in up to 1.5m of water for 30 minutes
• Detection range of 20mm, so suitable for use in confined spaces
• Lack of physical contact in operation means minimal wear and low maintenance
• Suitable for use in areas where explosive atmospheres may be present

• Industrial automation
• Process control
• Pharmaceutical manufacturing
• Warehouses and packaging facilities

Thanks to its compact size of 114 (L) x 40 (W) x 40mm (D), the device takes up minimal space in your setup.