STMicroelectronics P-NUCLEO-IHM001 Nucleo Pack Motor Controller

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

P-NUCLEO-IHM001 BLDC Motor Control Development Kit

The STM32 Nucleo pack P-NUCLEO-IHM001 is a kit composed of the X-NUCLEO-IHM07M1 board, the NUCLEO-F302R8 board and the motor. The X-NUCLEO-IHM07M1 is a 3 phase brushless DC motor driver expansion board for STM32 Nucleo, based on L6230 driver with integrated overcurrent and thermal protection.
The NUCLEO-F302R8 board provides an affordable and flexible way for users to try out new concepts and to build prototypes with the STM32 MCUs.
The integrated ST-LINK/V2-1 provides an embedded in-circuit debugger and programmer for the STM32, so there is no need for a separate probe.
The STM32F302R8 is a 32-bit analogue and DSP, with Floating Point Unit (FPU), ARM Cortex-M4 microcontroller, operating up to 72 MHz, with 64 KB Flash, 12-bit 5MSPS Analogue-to-Digital Converter, Comparator, and Operational-Amplifier.
The Arduino connectivity support and ST Morpho headers make it easy to expand.
An external power supply 8 V to 12 V, is required to power the kit.

X-NUCLEO-IHM07M1 features

3 phase driver board for BLDC/PMSM motors based on L6230
Nominal operating voltage range from 8 V to 48 V dc
2.8 A output peak current (1.4 A root mean square)
Non-dissipative overcurrent detection and protection
Full compatible with ST 6-step or ST-FOC-control algorithm
Full support for sensorless and sensor mode
3-Shunt and 1-Shunt configurable jumpers for motor current sensing
Hall encoder motor sensor connector and circuit
Potentiometer available for speed regulation
Compatible with STM32 Nucleo boards
Equipped with ST Morpho connectors

NUCLEO-F302R8 features

STM32F302R8 32-bit Microcontroller based on ARM Cortex-M4 core (72 MHz max) with 64-Kbyte Flash memory and 16-Kbyte SRAM
Two types of extension resources: Arduino UNO Revision 3 connectivity and ST Morpho extension pin headers for full access to all STM32 I/Os
Mbed-enabled (http://mbed.org)
On-board ST-LINK/V2-1 debugger/programmer with SWD connector: selection-mode switch to use the kit as a standalone ST-LINK/V2-1
Two push buttons: "User" and "Reset"

3 phase motor

Bull-Running model BR2804-1700 kV
Nominal voltage 11.1 V dc (battery up to 3 S)
Maximum DC current: 5 A
Seven pole pairs

STM32F3 Series 32-Bit ARM® Cortex®-M4 Microcontrollers, STMicroelectronics

The STM32 F3 series of mixed-signal MCUs with DSP and FPU instructions combines a 32-bit ARM Cortex-M4 core running at 72MHz with an advanced analogue peripheral set.

Fast comparators (50ns)
Programmable gain amplifiers (4 gain ranges)
12-Bit DACs
Fast 12-Bit ADCs (5 MSPS per channel with up to 18MSPS in interleaved mode)
16-Bit sigma-delta ADCs
Fast 144MHz motor control timers, timing resolution better 7ns

Specifications
Attribute Value
Power Management Function Motor Controller
Kit Classification Development Kit
Kit Name Nucleo Pack
18 In stock for delivery within 3 working days
Price Each
SGD 67.50
(exc. GST)
SGD 72.22
(inc. GST)
units
Per unit
1 +
SGD67.50
Related Products
The STMicroelectronics STEVAL-IFP028V1 is an evaluation board for ...
Description:
The STMicroelectronics STEVAL-IFP028V1 is an evaluation board for the IPS160H single high-side switch. The IPS160H monolithic device drives capacitive, resistive or inductive loads with one side connected to ground. The IPS160H matches safety integrity level (SIL) applications.The STEVAL-IFP028V1 board meets ...
The NCP101X series integrates a fixed-frequency current-mode controller ...
Description:
The NCP101X series integrates a fixed-frequency current-mode controller and a 700 V voltage MOSFET. Housed in a PDIP7 package, the NCP101X offers everything needed to build a rugged and low-cost power supply, including soft-start, frequency jittering, short-circuit protection, skip-cycle, a ...
Semtech offers wireless power transmitter and receiver platforms ...
Description:
Semtech offers wireless power transmitter and receiver platforms for both direct and indirect charge applications in both standards compliant and non-compliant systems. Semtech is a member of the Wireless Power Consortium (WPC), and is active in helping shape the future ...
The Supertex SR087DB1 is an inductor less switching ...
Description:
The Supertex SR087DB1 is an inductor less switching power supply intended for operation directly from a 120/230VAC line. Two outputs, 12.6V and 5.0V are provided. The operating principle is to turn on a pass transistor when the rectified AC input ...