Molex Premise NetworksPowerCat 6A, 3m Cat6a, Grey RJ45 to Male RJ45 Male, STPShielded, Terminated LSZH Sheath

PowerCat™ cat6a RJ45 shielded patch cords designed for high speed 10-Gigabit Ethernet (10GBASE-T) data networks and suitable for EIA 568A/B wiring applications. These PowerCat™ cat6a RJ45 shielded patch cable assemblies are made from 4 pair 26AWG stranded wire with an aluminium/polyester shield with tinned copper drain wire and a PVC jacket. (stock numbers 775-4858, 775-4852, 775-4861, 775-4864, 775-4868 and 775-4877 have a Low Smoke Zero Halogen LSZH jacket). Each of these PowerCat™ cat6a patch cables are terminated either end with an RJ45 WE8W shielded plug with an overmoulded anti-snag strain relief boot. The maximum electrical ratings for these RJ45 patch cord assemblies is 150Vac, 1.5A @ 25°C.

Note: Category 6A performance when installed as a complete PowerCat™t cat6a shielded system.

TIA/EIA-568-B.2-10
ISO/IEC 11801 A1.1
FCC Subpart F 68.5
IEC-603-7

The PowerCat 6A Shielded Patch Cord features a voltage rating of 150V AC and a current rating of 1.5A. Its stranded copper wire and shielded design ensure reliable data transmission and reduced interference. The cord complies with RoHS standards and has a low smoke zero halogen (LSZH) sheath for enhanced safety.

• 26AWG stranded copper wire for consistent signal quality
• Shielded (STP) design reduces interference
• Terminated with RJ45 plugs for connectivity
• Supports EIA 568A and 568B wiring configurations
• LSZH sheath for low smoke emissions
• Designed for 10G performance

• 10GBASE-T network installations
• Automated electrical systems
• Data centres requiring high-performance cabling
• Environments with reduced smoke emission standards

Yes, it is designed for 10GBASE-T networks.

No, it is intended for indoor use.

Yes, it is backward compatible with 10/100/1000BASE-T networks.

Yes, it operates within -20°C to 60°C.