The demo board supports the LDO regulator NCP3337 in DFN10 package with adjustable output voltage. The ENABLE function allows turn the device to low consumption mode with quiescent current below 1 μA. The Power Good pin allows output voltage monitoring. The additional CNR capacitor reduces the output noise. Size: 45mm x 30mm x 18mm
High Accuracy Over Line and Load (±0.9% at 25°C) Ultra-Low Dropout Voltage at Full Load (260 mV typ.) No Minimum Output Current Required for Stability Low Noise (33 _Vrms w/10 nF Cnr and 52 _Vrms w/out Cnr) Low Shutdown Current (< 1 mA) Reverse Bias Protected 2.9 V to 12 V Supply Range Thermal Shutdown Protection Current Limitation Stable with Any Type of Capacitor (including MLCC) Power Good Output PCMCIA Card Cellular Phones Camcorders and Cameras Networking Systems, DSL/Cable Modems Cable Set-Top Box MP3/CD Players DSP Supply Displays and Monitors
Attribute
Value
Power Management Function
LDO Voltage Regulator
For Use With
Adjustable Output Voltage LDO Regulator
Kit Classification
Evaluation Board
Featured Device
NCP3337MNADJR2G
Kit Name
Adjustable Output Voltage LDO Regulator Evaluation Board