ifm Electronic PLC I/O Module 4 Inputs, 4 Outputs 18 → 30 V dc

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): DE
Product Details

AC52xx - AS-i single slaves

Digital field modules
Simple addressing
Fast assembly of upper and lower sections without tools
3 freely configurable directions for flat lead
High IP67 protection rating

Actuator Sensor Interface (AS-I)

Actuator Sensor Interface, AS-I

AS-I is a method of providing communication from simple discrete components such as an inductive sensor or switching valve via a simple two-wire network to a controlling device such as a PLC or PC.
A unique feature of the AS-I system is the flat, two-core cable (stock no 242-6189) designed to enable fast and easy connection, ensuring correct polarity every time. The cable can be used in a network up to 100m (300m if repeaters are used).
By providing power and data down the same cable, the amount of time normally used to connect sensors and actuators is dramatically reduced, thereby providing savings in cable requirements and man-hours.
The choice of AS-I connection modules enables the user to connect standard sensors/actuators to the BUS with all the address benefits of using dedicated sensors/actuators. It also serves to increase the number of I/O nodes that are available to the user by the use of addressable splitter boxes. The connection modules are available in a variety of packages and can accommodate up to 4 inputs and 4 outputs. This enables up to 124 inputs and 124 outputs to be connected to a single AS-I network.
Another feature of AS-I system is the method by which the sensors or modules communicate with the host. The design of the communications protocol ensures high data accuracy and error detection capabilities, making the ASI system ideal for automation in noisy and industrial environments.

Benefits of AS-I

Replaces hard wiring
High data speed
Low cost installation
Intelligent diagnostics
Easy to learn and install
Highly flexible
Can connect to other fieldbus systems
User-friendly
Off-site pre-assembly and test
Easy maintenance
Faster on-site commissioning
Host or stand alone use
Able to use standard sensors and actuators (using modules)

Specifications
Attribute Value
Number of Inputs 4
Number of Outputs 4
Input Type Digital
Output Type Digital
Number of I/O 8
Voltage Category 18 → 30 V dc
Stock check temporarily unavailable - call for stock availability
Price Each
SGD 274.32
(exc. GST)
SGD 293.52
(inc. GST)
units
Per unit
1 +
SGD274.32
Related Products
From the Flare Series this compact coupling relay ...
Description:
From the Flare Series this compact coupling relay features a number of functions and can be mounted to any DIN rail for use in a number of industrial applications. DIN rail mounting, hermetically sealedPlug in jumpers to link common potentialsStatus ...
The Rhode & Schwarz RTB2000 series digital oscilloscopes ...
Description:
The Rhode & Schwarz RTB2000 series digital oscilloscopes offer the Power of ten: 10-bit ADC, 10 Msample memory and 10.1 inch colour touchscreen. These features ombined with smart operating concepts make the R&S®RTB2000 series the perfect tools for university laboratories, ...
The RevPi DI, like its counterparts, the DO/DIO, ...
Description:
The RevPi DI, like its counterparts, the DO/DIO, features a 28 pin connector on the front side of the module (2 rows of 14 male pins) and comes with female connectors with spring clip contacts up to 1.5mm². The DI ...
SCALANCE XM416-4C, managed modular IE switch, 16x 10/100/1000 ...
Description:
SCALANCE XM416-4C, managed modular IE switch, 16x 10/100/1000 Mbit/s RJ45, 4x 100/1000 Mbit/s SFP, contains 4 combo ports, in total 16 ports can be used, expandable to 24 ports electrical or optical, assembly: DIN rail/S7 mounting rail, PROFINET IO device, ...