Telemecanique Sensors Diffuse Photoelectric Sensor, Barrel Sensor, 100 mm Detection Range

RS Stock No.:: 695-6817
Mfr. Part No.:: XUB4APANL2
Manufacturer:: Telemecanique Sensors

Telemecanique Sensors Diffuse Photoelectric Sensor, Barrel Sensor, 100 mm Detection Range

Subtotal (1 unit)**

SGD82.55

(exc. GST)

SGD89.98

(inc. GST)

15 In stock for delivery within 4 working days*

* Delivery dates may change based on your chosen quantity and delivery address.

FREE delivery for orders over SGD250.00 (ex GST)

Units	Per unit
1 +	SGD82.55

**price indicative

RS Stock No.:: 695-6817
Mfr. Part No.:: XUB4APANL2
Manufacturer:: Telemecanique Sensors

M18 cylindrical photoelectric sensors

The OsiSense XU general purpose photo-electric sensor from Schneider is available in single mode or multi-mode versions in the following formats: Reflex (XUB 1); Thru-beam (XUB 2); Diffuse (XUB 4); Diffuse with adjustable sensitivity (XUB 5); Polarised reflex (XUB 9).

M18 cylindrical photoelectric sensors in plastic or metal housing
Short-circuit protection and LED status indicator
Single or multi-mode function
2m cable or M12 connector (4 pin) output

How do they work and where can I use them?

An OsiSense Photoelectric has a light beam transmitter (light-emitting diode, LED) and a light-sensitive receiver (photo-transistor). A light-emitting diode is an electronic semi-conductor component emitting light when electric current flows through it. The light can be visible or invisible, depending on the transmission wavelength.

An object is detected when it enters the transmitted light beam and, in so doing, affects the intensity of the light at the receiver.

Depending on the model and application requirements, the transmission beam is either non-visible infrared or ultraviolet (for detection of luminescent materials). It may also be a visible red or green (for colour mark reading etc.) and laser red (for long sensing distance and short focal length).

The advantage of LEDs is their very fast response. To render the system insensitive to ambient light, the current flowing through the LED is modulated to produce a pulsed light transmission. Only the pulsed signal will be used by the photo-transistor and processed to control the load.

Photelectric Sensor Systems Available.

Through-Beam or Multimode (set in through-beam mode).

Longer sensing distance – (up to 100 m – XUBL line).

Precise detection with high repeat accuracy.

Not affected by colour or position angle.

Good resistance to difficult environments – example- dust, dirt.

When using several sensors ensure the sensors do not disrupt each other.

Polarised Reflex system or Multimode (with reflector accessory).

Medium sensing distance – (up to 15 m).

Precise detection.

Only one unit wired.

No effect on detection by colour or position angle.

Visible Red beam transmission.

When using several sensors ensure the sensors do not disrupt each other.

Multimode sensor (with reflector accessory).

Easy alignment. 3 LEDs providing set-up assistance.Anti-interferance function (2 sensors can be used with no alignment precautions). Semi-transparent objects detected by using teach mode function.

Diffuse System or Multimode.

Short sensing distance. Only one unit to be wired.

Easy to use. Fast response. Low cost.

Sensitive to background colours and the working environment (dirt, dust).

When using several sensors ensure the sensors do not disrupt each other.

Optical Forks.

Made from metal a strong and sturdy sensor suitable for packaging and conveying applications with label detection. No alignment needed in through-beam mode.

Only one connection needed. LEDs. Adjustable or fixed. Detect small parts – minimum size detected to 0.05 mm.

High switching frequency from 4 kHz to 25 kHz. – excellent for higher operating rates.

XUB4APANL2 OsiSense XUB Photoelectric Sensor.

XUB Sensor.

General purpose single mode.

Supply voltage - 12 – 24 V dc

Cylindrical M18.

Diffuse detection.

Plastic material.

Axial line of sight.

Discreet signal - PNP.

DC Supply circuit.

3-Wire.

1 NO.

Electrical connection- Cable, 2 m.

Infrared diffuse emission.

0.1 m sensing distance (diffuse).

Maximum sensing distance 0.15 m diffuse.

Enclosure material – PBT, Lens material PMMA.

Solid state output.

1 LED (yellow output state).

18 mm Diameter.

60 mm length.

Weight 0.04 kg.

Protection.

IP 65 to IEC 60529, IP 67 to IEC 60529.

Certified.

CSA, UL, CE.

Attribute	Value
Sensor Style	Barrel
Detection Type	Diffuse
Detection Range	0.1 m
Output Type	PNP
Electrical Connection	2/5-Wire Cable 2m
Maximum DC Voltage	24V
Light Source	Infrared
IP Rating	IP65, IP67
Maximum Current	100 mA
Response Time	<1 ms
Housing Material	PBT
Series	XUB
Minimum Operating Temperature	-25°C
Maximum Operating Temperature	+55°C