Renesas Electronics PS9117A-F3-AX DC Input Photocoupler, Surface, 5-Pin SO
- RS Stock No.:
- 234-7106
- Mfr. Part No.:
- PS9117A-F3-AX
- Manufacturer:
- Renesas Electronics
This image is representative of the product range
Unavailable
RS will no longer stock this product.
- RS Stock No.:
- 234-7106
- Mfr. Part No.:
- PS9117A-F3-AX
- Manufacturer:
- Renesas Electronics
Specifications
Technical data sheets
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | Renesas Electronics | |
| Mount Type | Surface | |
| Product Type | Photocoupler | |
| Maximum Forward Voltage | 1.8V | |
| Packaging | Embossed Tape 2500 pcs/Reel | |
| Number of Channels | 1 | |
| Number of Pins | 5 | |
| Package Type | SO | |
| Input Current Type | DC | |
| Typical Rise Time | 20ns | |
| Maximum Input Current | 30mA | |
| Isolation Voltage | 3750Vrms | |
| Minimum Operating Temperature | -40°C | |
| Logic Output | Yes | |
| Maximum Operating Temperature | 85°C | |
| Standards/Approvals | CAN/CSA-C22.2 No. 62368-1, DIN EN 60747-5-5, UL1577 | |
| Typical Fall Time | 5ns | |
| Series | PS | |
| Automotive Standard | No | |
| Select all | ||
|---|---|---|
Brand Renesas Electronics | ||
Mount Type Surface | ||
Product Type Photocoupler | ||
Maximum Forward Voltage 1.8V | ||
Packaging Embossed Tape 2500 pcs/Reel | ||
Number of Channels 1 | ||
Number of Pins 5 | ||
Package Type SO | ||
Input Current Type DC | ||
Typical Rise Time 20ns | ||
Maximum Input Current 30mA | ||
Isolation Voltage 3750Vrms | ||
Minimum Operating Temperature -40°C | ||
Logic Output Yes | ||
Maximum Operating Temperature 85°C | ||
Standards/Approvals CAN/CSA-C22.2 No. 62368-1, DIN EN 60747-5-5, UL1577 | ||
Typical Fall Time 5ns | ||
Series PS | ||
Automotive Standard No | ||
The Renesas Electronics optically coupled high-speed, Active low type isolator containing an AlGaAs LED on the input side and a photodiode and a signal processing circuit on the output side on one chip. It is designed specifically for high common mode transient immunity and low Pulse width distortion. It is suitable for high density application.
Pulse width distortion
High-speed
High isolation voltage
Open collector output