Eaton 2 Pole Panel Mount Non Fused Isolator Switch - 63 A Maximum Current, 22 kW Power Rating, IP65

  • RS Stock No. 257-9514
  • Mfr. Part No. 094469 & T5B-1-102/EA/SVB
  • Manufacturer Eaton
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): GB
Product Details

Panel Door Mounted Switch Disconnector

Eaton's panel mount isolator switch can sometimes be referred to as a switch disconnector, this is because it has been created and designed to safely isolate a circuit whilst it is being used or maintained. This isolator switch breaks or isolates a circuit through the rotation of the rotary handle and locking ring. This type of non-fused isolator switch will be found isolating circuit breakers, transmission lines, transformers and a multitude of other applications.

Features & Benefits

Padlockable in OFF position, up to 3 padlocks and non-locking versions
Ingress protection to IP65
2 and 3 pole versions have built in neutral and earth connections
3 pole switches ('P' type only) accept add-on switched neutral and auxiliary contacts (except 20A switches) – see accessories (RS 219-1439 typical)
Rated operating voltage: 690 Vac
Switching power quoted for 380 - 440 Vac

What is the difference between a fused switch disconnector and a non-fused switch disconnector?

Unlike fused switch disconnectors, a non-fuse isolator switch does not use a fuse to break or put a circuit into isolation, they instead use a rotary to disconnect or isolate a circuit.


IEC (EN60) 947, IEC (EN60) 204



Attribute Value
Number of Poles 2
Maximum Current 63 A
Mounting Type Panel Mount
Normal State Configuration NO
Power Rating 22 kW
IP Rating IP65
Accepts Padlocks Yes
Voltage Rating 440 V ac
Auxiliary Contacts Available Yes
Electrical Phase 1
Switch Rating 1300 A
Length 88mm
Width 88mm
Depth 54mm
Terminal Type Screw
Minimum Operating Temperature -25°C
Handle Colour Red
Maximum Operating Temperature +50°C
Throw Configuration Single
2 In stock for delivery within 4 working days
Price Each
SGD 143.14
(exc. GST)
SGD 153.16
(inc. GST)
Per unit
1 - 5
6 - 11
12 +
Related Products
The Eaton P1, 3 pole main switch has ...
The Eaton P1, 3 pole main switch has current ratings of 32 A. It provides emergency switching off function. It has a steel enclosure with a yellow locking ring and red rotary handle. IP 65 degree rated protectionScrew type connectionSurface ...
All CBEs have blade terminals and have an ...
All CBEs have blade terminals and have an insulation resistance greater than 100MΩ (MegaOhms). Insulation Resistance >100MΩThe convenience of on/off switching and overcurrent protection in one packageVisual indication of breaker state via the unique, single shot moulded, two colour actuator ...
This Professional range of Eaton flush or surface ...
This Professional range of Eaton flush or surface mounted changeover, Mains, maintenance and Repair switches provides a solution for heavy-duty and industrial applications. These type of switches can sometimes be referred to as a emergency mains switch or emergency button, ...
Main and emergency stop switchHandle in Black or ...
Main and emergency stop switchHandle in Black or Red/Yellow(emergency stop)Front plate 48 x 48 mmFour hole or central hole fixingAccepts 3 padlocksFront panel seal IP65.