6 Pole Panel Mount Non Fused Isolator Switch, NO, 63 A, IP65

  • RS Stock No. 764-984
  • Mfr. Part No. T5B-4-15164/S/SVB-SOND
  • Manufacturer Eaton
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): GB
Product Details

Switch Disconnectors with Auxiliary Contacts

For use on single-speed single direction motors
Sheet steel enclosures, ingress protection to IP65
Supplied with 1 x N/O and 1 x N/C auxiliary contact (20A 3 pole one N/O contact only)
Lockable in off position with up to three padlocks
Cover interlocked in the ON position

Note

Switch power/capacity refers to AC23A use at 380-440V. Accessories shown in this module only suitable for use with P series switch disconnectors.

Standards

BS EN60947 and VDE 0113

Warning

  • Because of the heating effect in compact enclosures, the 100A versions should be downrated to 85A when in continuous operation.
    Auxiliary contact 333-546 should not be used with switches above 100A operating current.
Specifications
Attribute Value
Number of Poles 6
Maximum Current 63 A
Mounting Type Panel Mount
Normal State Configuration NO
IP Rating IP65
Accepts Padlocks Yes
Voltage Rating 440 V ac
Auxiliary Contacts Available Yes
Maximum Operating Temperature +40°C
Minimum Operating Temperature -25°C
Handle Colour Red
Terminal Type Screw
Throw Configuration Single
1 In stock for delivery within 4 working days
Price Each
SGD 481.38
(exc. GST)
SGD 515.08
(inc. GST)
units
Per unit
1 - 5
SGD481.38
6 +
SGD453.22
Related Products
All CBEs have blade terminals and have an ...
Description:
All CBEs have blade terminals and have an insulation resistance greater than 100MΩ (MegaOhms). Insulation Resistance >100MΩThe convenience of on/off switching and overcurrent protection in one packageVisual indication of breaker state via the unique, single shot moulded, two colour actuator ...
All have a nominal voltage of 690V. The ...
Description:
All have a nominal voltage of 690V. The stated motor rating utilisation category AC23A/AC3 is for 3 phase 380/440V supply. Padlockable (x4) in "OFF" positionFingerproof main terminals on 20A to 63A switchesTerminal shrouds supplied with 80A to 250A switches.
Switch disconnectors are used to isolate electrical equipment ...
Description:
Switch disconnectors are used to isolate electrical equipment before any essential maintenance or repair work can be completed. Switch disconnectors ensure electrical circuits are de-energized safely in accordance with the electricity at work regulations. Engineers and electricians are then able ...
A high quality, durable back of panel mount ...
Description:
A high quality, durable back of panel mount isolator complete with handle and shaft. The switch is back of panel mount, either 35mm din rail or two screw fixing. The handle is interlocked ensuring removal only in the off position, ...