RS PRO Brass Full Bore, 2 Way, Ball Valve, 28mm
- RS Stock No.:
- 486-344
- Manufacturer:
- RS PRO
Price Each
Was SGD71.97
You pay
SGD57.58
(exc. GST)
SGD62.76
(inc. GST)
35 In stock for delivery within 4 working days
Units | Per unit |
|---|---|
| 1 - 24 | SGD57.58 |
| 25 + | SGD56.38 |
- RS Stock No.:
- 486-344
- Manufacturer:
- RS PRO
- COO (Country of Origin):
- IT
S.28 dezincification-resistant, compression ends Brass Ball Valve - 1/4 Turn
Several governmental authorities recommend use of special alloys for valves handling water in areas where there is a problem of dezincification. RuB DZR valves are designed to meet such requirements. By using new technology these valves retain the reliability and competitiveness of brass, but are comparable to bronze in corrosion resistance. Be kind with yourself, make sure the valve that brings you pure fresh water is an RuB DZR valve.
Features & Benefits
Application: Drinking water, water, plumbing
Operating Temperature: -20°C (-4°F)/+120°C (+250°F)
Operating pressure: PN16 up to 54 mm non-shock cold working pressure
Threads: Compression ends to EN 1254-2 and NKB no.12
Port: Full
Stem Configuration: Blowout-proof nickel plated brass stem, with two FPM O-Rings at the stem for maximum safety
Ball seats: Pure PTFE self-lubricating, with flexible-lip design
Body: DZR brass. Full port to DIN 3357 for maximum flow
100% Made in Italy
Chrome plated brass ball for longer life
Silicone-free lubricant on all seals
Travel stops on body to avoid stress at stem
24 h 100% seal test guaranteed
Dual sealing system allows valve to be operated in either direction
No metal-to-metal moving parts
No maintenance ever required
Handle clearly shows ball position
Quality: Hot forged sand blasted DZR unplated brass body and cap sealed with Loctite or equivalent thread sealant Dezincification Resistant ADZ-T and ADZ-P brass approved to SBN-PFS 1983:2 and NR-BFS 1988:18 specifications
Typical Applications
Manual quarter turn ball valves are available in various sizes to meet a range of applications. They feature a manual hand lever and can be made from brass, stainless steel and plastic. Ball valves are popular as they are reliable and durable and still close securely over long periods making them suitable for shutoff and control applications.
Applications include:
Heating systems
Water treatment
Liquid flow control
Applications include:
Heating systems
Water treatment
Liquid flow control
FAQs
How does a manual ball valve work?
A ball valve is a type of shut off valve that controls the flow of liquids or gases by its rotary ball. The valve is open when the ball’s hole is in line with the flow and closed when the ball is rotated by a quarter turn (90 degrees) by the valve handle.
What is the difference between full bore and reduced bore ball valves?
A full-bore ball valve (also known as full port) has an oversized ball so that the hole in the ball is the same size as the pipeline resulting in lover friction loss. In other words, the bore diameter has the same internal diameter as the pipe. A reduced bore valve has a smaller bore diameter than the internal diameter of the pipework it is on.
A ball valve is a type of shut off valve that controls the flow of liquids or gases by its rotary ball. The valve is open when the ball’s hole is in line with the flow and closed when the ball is rotated by a quarter turn (90 degrees) by the valve handle.
What is the difference between full bore and reduced bore ball valves?
A full-bore ball valve (also known as full port) has an oversized ball so that the hole in the ball is the same size as the pipeline resulting in lover friction loss. In other words, the bore diameter has the same internal diameter as the pipe. A reduced bore valve has a smaller bore diameter than the internal diameter of the pipework it is on.
Note
Approvals apply to specific configurations only
Warning
Freezing of the fluid in the installation may severely damage the valve
Approvals
WRAS (UK)
KIWA-Swedcert (Sweden)
GOST-R (Russia)
Expert Conclusion (Russia)
EAC Conforming (Russia)
UkrSepro (Ukraine)
RoHS Compliant
KIWA-Swedcert (Sweden)
GOST-R (Russia)
Expert Conclusion (Russia)
EAC Conforming (Russia)
UkrSepro (Ukraine)
RoHS Compliant
Approvals
WRc
Standards
BS 864/2
Attribute | Value |
|---|---|
| Type | Full Bore, 2 Way |
| Ball Material | Brass |
| Attachment Type | Compression |
| Compression Fitting Size | 28mm |
| Body Material | Brass |
| Safe for Use With | Gas, Oil, Petrol, Water |
| Handle Type | Lever |
| Handle Material | PVC Coated Steel |
| Maximum Working Pressure psi | 232psi |
| Maximum Working Pressure bar | 16bar |
| Handle Colour | White |