Grey Push Button Intermediate IP44 Light Switch Light Grey, 1 Way Screwless, 1 Gang, 250 V LED IP44 Thermoplastic

  • RS Stock No. 150-4084
  • Mfr. Part No. 540396001
  • Manufacturer Kopp
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): TN
Product Details

Distinctive appearance
Modern Colours in light grey / anthracite
Optimized selection of products for a variety of applications in building installation technology
Fine value for money
Removable switch and outlet socket with screw less terminals
Conductor cross sections up to 2.5 mm²
Large Wiring space
High material quality with high-quality thermoplastics
halogen-free
Resistant against many chemical agents

Specifications
Attribute Value
Switch Type Push Button
Number of Gangs 1
Number of Ways 1
IP Rating IP44
Colour Grey
Material Thermoplastic
Voltage Rating 250 V
Illumination LED
Faceplate Fixing Screwless
Colour Shade Light Grey
Stock check temporarily unavailable - call for stock availability
Price Each
Was SGD17.60
SGD 17.33
(exc. GST)
SGD 18.54
(inc. GST)
units
Per unit
1 - 9
SGD17.33
10 +
SGD16.13
Related Products
This Bodo Ehmann electronic LED dimmer switch is ...
Description:
This Bodo Ehmann electronic LED dimmer switch is silent, as it operates without a choke. There is no standby consumption thanks to a real on/off switch saving energy. The minimum and maximum brightness can be adjusted in wide ranges, resulting ...
PIR sensor swith control element with adjustable operating ...
Description:
PIR sensor swith control element with adjustable operating modes: semi-autometic, automatic switch-on, manual switch-off, automatic timer, manual switch-on, automatic (timer and motion controlled) switch-off, automatic mode, automatic (motion controlled) switch-on and switch-offPush-switch function possible at all ...
From miniature pilot lights and industrial switches that ...
Description:
From miniature pilot lights and industrial switches that mount into 8mm panel cut outs through full size industrial switches that mount into 30mm cutouts, we have an industrial switch or indicator for almost any application. Terminations include solder / quick ...
Panel mounting for use in Zone 1 hazardous ...
Description:
Panel mounting for use in Zone 1 hazardous areas. Maximum panel thickness is 5mm and the mounting hole required is 30.5mm diameter.,Front element is fixed to panel using the clamp nut. Body/contact block components fitted from rear utilising the built ...