Seeed Studio 104030010, Grove-Blue LED LED Module

  • RS Stock No. 179-3720
  • Mfr. Part No. 104030010
  • Manufacturer Seeed Studio
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): CN
Product Details

Its heart is a dual channel H-bridge driver chip that can handle current up to 2A per channel, controlled by an Atmel ATmega8L which handles the I2C communication with for example an Arduino. Both motors can be driven simultaneously while set to a different speed and direction. It can power two brushed DC motors or one 4-wire two-phase stepper motor. It requires a 6V to 15V power supply to power the motor and has an onboard 5V voltage regulator which can power the I2C bus (selectable by jumper). All driver lines are diode protected from back EMF.The easy software interface is not the only easy-to-use feature because the I2C motor driver is designed to get you up and running in notime. It features a LED for power and four LED's to indicate if and to which direction each motor is running. Screw terminals facilitate motor and power connections, and the GROVE system plug and I2C interface enables you to daisy-chain the driver with many other devices.

Specifications
Attribute Value
LED Technology LED
Kit Classification Module
Kit Name Grove-Blue LED
119 In stock for delivery within 4 working days
Price Each
SGD 3.23
(exc. GST)
SGD 3.46
(inc. GST)
units
Per unit
1 - 4
SGD3.23
5 +
SGD3.12
Related Products
The LZ4 Series LED modules feature a 10W ...
Description:
The LZ4 Series LED modules feature a 10W LED emitter mounted on a star MCPCB. The MCPCB can be attached to a heat sink with M3 screws and provides "+" (Anode) and "-" (Cathode) solder pads for electrical connection to ...
The EVALLED-ICL8002G-B2 is an evaluation board for dimmable ...
Description:
The EVALLED-ICL8002G-B2 is an evaluation board for dimmable 12 W LED bulb in non-isolated buck topology. The demo board high compatibility with a wide range of dimmers has been accomplished by adding damping and bleeding circuit blocks. The output current ...
The EVALLED-ICL8002G-B3 is demo board for dimmable 20 ...
Description:
The EVALLED-ICL8002G-B3 is demo board for dimmable 20 W LED PAR38 in isolated flyback topology. It is designed for high efficiency, high-power factor, low THD and isolation. The primary side control with the integrated PFC and phase-cut dimming control makes ...
The Click accessory modules plug into the MikroBUS ...
Description:
The Click accessory modules plug into the MikroBUS sockets in MikroElektronika microcontroller development boards.The 8x8 B Click features an 8 x 8 blue LED matrix with a serial interface. MAX7219 common-cathode display driver with serial I/O interfaceAnalogue and digital brightness ...