FTDI Chip, 3.3 TTL Wire End USB to UART Cable, TTL-232RG-VSW3V3-WE

  • RS Stock No. 715-8522
  • Mfr. Part No. TTL-232RG-VSW3V3-WE
  • Manufacturer FTDI Chip
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): CN
Product Details

FTDI Chip USB To UART Cable

The FTDI chip USB to UART cable is a fast and simple way to connect devices with a TTL level serial interface to USB. It is available with TTL logic level of 3.3V. Each cable contains a small internal electronic circuit board, utilising the FT232R, encapsulated into the USB connector at the end of the cable. The cable has a gauge of 24AWG and diameter of 5mm. They are un-terminated, bare and tinned wires. The circuit is powered from the USB using 5V power pins and any VCC connection, always at 5VDC. These cables are supported with Microsoft WHQL certified VCP drivers for Windows, Apple Mac, and Linux.

Features and Benefits

Connect directly to a microcontroller UART or I/O pins
Data transfer rate is up to 3Mbps
Generic converter cable provides a USB to TTL Serial interface with various logic levels
Low USB bandwidth consumption
Maximum output of 50mA on VCC
Operating temperature ranges between -40°C and 85°C
Powered from USB connector
Six core cable with length of 1.8m
Unique serial number attached, used for security purposes while transferring files via cable
USB 2.0 compatible
Various UART-end connector options available

Applications

Communication
Embedded system

Certifications

CE
FCC certified

Specifications
Attribute Value
Interface Function USB to UART
Kit Classification Cable
Kit Name 3.3 TTL Wire End
26 In stock for delivery within 4 working days
Price Each
SGD 31.75
(exc. GST)
SGD 33.97
(inc. GST)
units
Per unit
1 - 9
SGD31.75
10 - 49
SGD31.74
50 +
SGD29.69
Related Products
The FT245B and FT245R are USB to parallel ...
Description:
The FT245B and FT245R are USB to parallel FIFO converter interfaces. Single chip USB to parallel FIFO bidirectional data transfer interfaceEntire USB protocol handled on the chip - No USB-specific firmware programming requiredFT245B USB compatibleFT245R USB 2.0 Full Speed compatibleFT245R ...
These modules are MCU to USB host controller ...
Description:
These modules are MCU to USB host controller development modules for the Vinculum VNC1L device. They are supplied on a PCB designed to fit into 24-pin or 40-pin DIP sockets and provide access to the UART, parallel FIFO and SPI ...
The FT2232H Mini-Module is a USB-to-Serial/FIFO unit that ...
Description:
The FT2232H Mini-Module is a USB-to-Serial/FIFO unit that utilizes the FT2232H USB Hi-Speed 2-port bridge chipThe FT4232H Mini-Module is a USB-to-Serial/MPSSE unit that utilizes the FT4232H USB Hi-Speed 4-port bridge chipThe IC handles all the USB signalling and protocolsIdeal for ...
The LC231X module provides a low cost USB ...
Description:
The LC231X module provides a low cost USB to UART bridge using the FT231X IC to transfer data at up to 3M Baud. Ideal for programming Arduino Pro, ESP modules etc., the pinouts follow the industry standard FTDI TTL cable ...