FTDI Chip USB to UART Interface Board for FT231X, LC231X

  • RS Stock No. 150-1570
  • Mfr. Part No. LC231X
  • Manufacturer FTDI Chip
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

The LC231X module provides a low cost USB to UART bridge using the FT231X IC to transfer data at up to 3M Baud. Ideal for programming Arduino Pro, ESP modules etc., the pinouts follow the industry standard FTDI TTL cable interface. The module provides power and a UART interface with full modem handshaking control.. The interface IO levels may be set to either 3.3V or 5V by an on-board jumper – no soldering / de-soldering required. The LC231X module is a low cost USB to UART bridge using FTDI’s FT231X to transfer data at up to 3M Baud. Ideal for programming Arduino Pro, ESP modules etc.

Configurable IO voltage interface
USB 2.0 full speed
Provides a full modem control interface
Supported baud rates: 300 bps to 3 Mbps
Provides two I/O header options
-40oC to +85oC operational temperature range
Full RoHS compliance

Specifications
Attribute Value
Interface Function USB to UART
Kit Classification Interface Board
Featured Device FT231X
27 In stock for delivery within 3 working days
Price Each
SGD 10.53
(exc. GST)
SGD 11.27
(inc. GST)
units
Per unit
1 +
SGD10.53
Related Products
Evaluation boards designed to reduce development time for ...
Description:
Evaluation boards designed to reduce development time for EA eDIP series of intelligent graphic display modules, from Electronic Assembly, such as stock no. 758-8784. USB interface to connect directly to PCLEDS to show data trafficWide voltage range +3.3V to +5VSounder ...
LIN is a small, serial, slow, and cheap ...
Description:
LIN is a small, serial, slow, and cheap bus system. LIN is based on one master node and a number of LIN slaves (up to 16). It is a low-cost concept for automobile networks, for which it standardizes the transmission ...
A Click accessory module for use with MikroElektronika ...
Description:
A Click accessory module for use with MikroElektronika mikroBUS™ microcontroller development boards. The Matrix RGB click is a 16x32 RGB LED controller board incorporating a 32-bit FT900 microcontroller. A 16-way IDC connector on the board allows connection to a single ...
The MikroElektronika MIKROE-2549 Opto Encoder Click is a ...
Description:
The MikroElektronika MIKROE-2549 Opto Encoder Click is a linear incremental optical sensor/encoder click, which can be used for the movement or rotation encoding. Encoders of this type are widely used for many applications which involve precise detection of the position, ...