FTDI Chip USB Module for VNC1, VDIP1

  • RS Stock No. 406-552
  • Mfr. Part No. VDIP1
  • Manufacturer FTDI Chip
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

FTDI Chip USB Module

The FTDI Chip USB Module is an MCU to embedded USB host controller development kit for the VNC1L IC device. It is supplied on a PCB, designed to fit into a 24-pin DIP socket and provides access to the UART, parallel FIFO and SPI interface pins on the device via its AD and AC bus pins. This can handle the USB host interface and data transfer functions but owing to the inbuilt MCU and embedded flash memory, vinculum can encapsulate the USB device classes as well. When interfacing to mass storage devices such as USB flash drives, it also transparently handles the FAT File structure communicating via UART, SPI or parallel FIFO interfaces via a simple to implement command set. It is ideal for developing and rapid prototyping of VNC1L designs and its attractive quantity discount structure make this module suitable for incorporation into low and medium volume finished product designs.

Features and Benefits

USB single ’A’ type USB socket to interface with USB peripheral devices
Second USB interface port available via module pins, if required
Jumper selectable UART, parallel FIFO or SPI MCU interfaces
Single 5V supply input from USB connection
Program or update firmware via USB flash
Disk or via UART/Parallel FIFO/SPI interface
Power and traffic indicator LEDs
Auxiliary 3.3V at 200mA power output to power external logic
VNC1L firmware programming control pins PROG# and RESET# brought out onto jumper interface


Automation systems


ANSI/ESD S20.20:2014
BS EN 61340-5-1:2007

Attribute Value
Interface Function USB
Kit Classification Module
Featured Device VNC1
113 In stock for delivery within 4 working days
Price Each
SGD 37.68
(exc. GST)
SGD 40.32
(inc. GST)
Per unit
1 +
Related Products
A tiny screen yet delivers huge contrast and ...
A tiny screen yet delivers huge contrast and brightness and is perfect for displaying text or graphics. OLED screens do not need a backlight helping them to be energy efficient. Current draw depends on usage as each OLED LED draws ...
The EBM002 sensor module features an on-board standard ...
The EBM002 sensor module features an on-board standard shaft rotary potentiometer and can be used with the EB090 e-block Sensor Board alongside other sensor modules from Matrix TSL.Key Benefits of the EBM002•Flowcode software with 30 day free trial•0.1 inch pitch ...
The LC231X module provides a low cost USB ...
The LC231X module provides a low cost USB to UART bridge using the FT231X IC to transfer data at up to 3M Baud. Ideal for programming Arduino Pro, ESP modules etc., the pinouts follow the industry standard FTDI TTL cable ...
Designed to replace an existing DE9 connector, (male ...
Designed to replace an existing DE9 connector, (male or female) RS-232/TTL UART connection with a drop-in USB replacement connection. Miniaturised modules which closely resemble a DE9 connector for PCB mountingUSB mini-B socket connectorThe modules contain a USB-Serial bridge IC and ...