Honeywell Digital Hall Effect Sensor switching current 1 mA supply voltage 6.6 → 12.6 V dc

  • RS Stock No. 169-7651
  • Mfr. Part No. SS94A1
  • Manufacturer Honeywell
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

LOHET IC’s

Ceramic based, linear Hall-effect ratiometric devices which produce an output voltage proportional to the intensity of the magnetic field to which they are exposed.

Three-pin in-line PCB terminals, 0.1in spacing
Laser trimmed thin and thick film resistors
-40 to 125°C operating range

Specifications
Attribute Value
Output Type Digital
Supply Voltage 6.6 → 12.6 V dc
Terminal Type Solder Tag
Switching Current 1 mA
Length 7.6mm
Width 15.2mm
Depth 1.8mm
Dimensions 7.6 x 15.2 x 1.8 mm
Maximum Operating Temperature +125°C
Minimum Operating Temperature -40°C
Temporarily out of stock - back order for despatch 12/10/2020, delivery within 4 working days from despatch date
Price Each (In a Bag of 1000)
SGD 81.182
(exc. GST)
SGD 86.865
(inc. GST)
units
Per unit
Per Bag*
1000 +
SGD81.182
SGD81,182.00
*price indicative
Related Products
ABS housingOpen collector PNP + NPN OutputNormally open ...
Description:
ABS housingOpen collector PNP + NPN OutputNormally open contact with bounce free operationLED indication of alignment and diagnosisSpecified magnet assembly must be used with this sensorSealed to IP65Cable length 145mmDimensions 32 x 24 x 10 mm.
Ifm electronic JN Series 2-axis inclination sensors are ...
Description:
Ifm electronic JN Series 2-axis inclination sensors are designed for high measurement accuracies over the whole angular range. An active temperature compensation and high protection rating ensures that they operate reliably at extreme temperatures and rough environments. Configurable via IO-Link ...
Contact-free, bounce-free switchingImpervious to shocks and vibrationsContinuous short-circuit ...
Description:
Contact-free, bounce-free switchingImpervious to shocks and vibrationsContinuous short-circuit and overload proofHigh switching frequency → 5000 Hz3 m PUR connection cableTemperature range: -20 °C → +70 °CHigh IP67 protection rating.
The Cherry GS1001 series of gear tooth sensors ...
Description:
The Cherry GS1001 series of gear tooth sensors are hall effect sensors that are designed for use in applications where ferrous edge detection or near zero speed sensing is required. Stainless steel housingHigh speed capabilityImmune to rotational alignmentSinking (Open Collector) ...