A1230LLTR-T Allegro Microsystems,, Bipolar Hall Effect Sensor, 8-Pin SOIC

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): GB
Product Details

A1230 Dual Channel Quadrature Hall Effect Bipolar Switch, Allegro Microsystems

The Allegro Microsystems A1230 is a dual-channel, bipolar switch with two Hall-effect sensing elements. Each element provides a separate digital output for speed and direction signal processing.

The Hall elements are aligned with an accuracy greater than 1 μm. This accuracy makes it ideal for use in ring magnet based, speed and direction systems located in harsh automotive and industrial environments.

The A1230 contains two independent Hall-effect bipolar switches located 1 mm apart. The digital outputs are out of phase so the outputs are in quadrature when interfaced with the proper ring magnet design. Low-drift amplifiers guarantee symmetry between the switches.

The Allegro high-frequency chopper-stabilisation cancels offsets in each channel providing stable operation over the full specified temperature and voltage ranges.

The A1230 is available in a plastic 8-pin SOIC surface mount package and a plastic 4-pin SIP.

AEC-Q100 automotive qualified
Two matched Hall-effect switches on a single substrate
1 mm Hall element spacing
Superior temperature stability and industry-leading jitter performance through use of advanced chopper stabilisation topology
Integrated LDO regulator provides 3.3 V operation
Integrated ESD protection from outputs and VCC to ground
High-sensitivity switchpoints
Robust structure for EMC protection
Reverse-battery protection on supply and both output pins

Hall Effect Sensors, Allegro MicroSystems

Specifications
Attribute Value
Magnetic Type Bipolar
Mounting Type Surface Mount
Pin Count 8
Minimum Magnetic Sensor Release Point -30 Gs
Maximum Magnetic Sensor Operating Point 30 Gs
Minimum Operating Supply Voltage 3.3 V
Maximum Operating Supply Voltage 18 V
Length 4.9mm
Width 3.9mm
Height 1.47mm
Dimensions 4.9 x 3.9 x 1.47mm
Minimum Operating Temperature -40 °C
Maximum Operating Temperature +150 °C
Package Type SOIC
Typical Magnetic Sensor Hysteresis 14 Gs
164 In stock for delivery within 3 working days
Price Each (In a Pack of 2)
SGD 3.705
(exc. GST)
SGD 3.964
(inc. GST)
units
Per unit
Per Pack*
2 - 8
SGD3.705
SGD7.41
10 - 38
SGD3.42
SGD6.84
40 - 98
SGD3.235
SGD6.47
100 - 198
SGD3.045
SGD6.09
200 +
SGD2.90
SGD5.80
*price indicative
Packaging Options:
Related Products
Murata's low-g acceleration sensors include high performance digital ...
Description:
Murata's low-g acceleration sensors include high performance digital and analog accelerometers for both safety critical automotive and industrial applications. Based on 3D MEMS technology and intended for horizontal or vertical measurements. The sensing element and the measuring ASIC are assembled ...
Murata's low-g acceleration sensors include high performance digital ...
Description:
Murata's low-g acceleration sensors include high performance digital and analog accelerometers for both safety critical automotive and industrial applications. Based on 3D MEMS technology and intended for horizontal or vertical measurements. The sensing element and the measuring ASIC are assembled ...
Murata 3D MEMS industrial gyroscopes offer high performance ...
Description:
Murata 3D MEMS industrial gyroscopes offer high performance in difficult envrinoments. Sensing elements and the measuring circuitry are assembled into a pre-molded plastic dual-in-line (DIL) package, protected with silicon gel and covered with a stainless steel lid. In-built signal conditioning ...
The 74HC2G14:74HCT2G14 is a dual inverter with Schmitt-trigger ...
Description:
The 74HC2G14:74HCT2G14 is a dual inverter with Schmitt-trigger inputs. Inputs include clamp diodes. This enables the use of current limiting resistors to interface inputs to voltages in excess of VCC. Schmitt trigger inputs transform slowly changing input signals into sharply ...