Omron S8VM Switch Mode DIN Rail Panel Mount Power Supply, 230V ac, 24V dc, 70A Output, 1500W
- RS Stock No.:
- 110-463
- Mfr. Part No.:
- S8VM-15224C
- Manufacturer:
- Omron
Discontinued product
- RS Stock No.:
- 110-463
- Mfr. Part No.:
- S8VM-15224C
- Manufacturer:
- Omron
Technical data sheets
Legislation and Compliance
Product Details
15W to 1500W S8VM Series with Downtime warning
The S8VM range is in a traditional metal frame format with some new features. The S8VM range can be used as a first indication to supply problems which can result in lost production, The Early warning system (EWS) can diagnose different types of voltage dip and loss which in turn can be wired into a PLC or management system to warn of impending problems.
Series Benefits.
Output voltages easily identified by colour coded labels on the side of the unit
Meets the latest European and relevant international standard
Operating temperature range 0°C to +50°C
Meets the latest European and relevant international standard
Operating temperature range 0°C to +50°C
Part Number S8VM-15224C
The S8VM Switch mode, Bottom-mounted power supply is a covered type, terminal block structure with screw terminals. Your fingers are protected from electric shocks. S8VM-15224C has a power rating of 1500 W and an output voltage of 24 V dc plus a rated input voltage of 100 V ac to 240 V ac. This standard model incudes green output indicators plus has a fan providing forced air cooling and a power failure alarm notifies you of output voltage errors.
Bottom mounted power supplies can be front mounted using the correct mounting bracket for 300 w, 600 W and 1500 W models. Part number S8VM-15224C can be front mounted using a DIN Rail mounting bracket series S82Y-VM. Brackets are sold separately – see example stock number 818-6815.
Features and Benefits.
• Covered type power supply
• Screw terminal
• Design stops screws from falling out of the terminal block
• Switch mode
• Bottom mount
• Green output indicators
• Forced air cooled – built in fan
• Power rating 1500 W
• Output voltage 24 V dc
• Input voltage 100 V ac to 240 V ac
• Harmonic current emissions
• Efficiency 83% min.
• Frequency 50/60 Hz
• Electric shock finger protection
• RoHS compliant including Lead Free construction
• M8 bolts and nuts for the output terminals are NOT included with this model
Customer Warning.
The Safety standards will not apply if you replace the fan on this part number.
What is a DIN Rail Mounted Power Supply?
A DIN Rail is a standard type of rail that is used to mount the power supply into racks. DIN Rails are a support for equipment. DIN Rails are normally made from aluminium but if there is a chance that the power supply suffers any shock or vibration, use a steel DIN Rail.
What is A Switch Mode Power Supply?
Switch mode power supplies are a general purpose power supply include a switching regulator converting AC mains power to a lower voltage DC. A Switch mode power supply is efficient limiting any wasted energy.
Safety and Storage.
Do not use an inverter output for the power supply. Mount the power supply using a DIN Rail and secure correctly ensuring limited vibration and shock resistance. Install the power supply away from contactors and other devices. Keep the power supply away from strong high frequency noise and surge.
Vibration resistance 10 Hz to 55 Hz. 0.375 mm single amplitude in each 3 directions for 2 hours.
Shock resistance 150 m/s **2 in each 6 directions 3 times.
Standards
UL, CSA, EN, SELV, VDE
Specifications
Attribute | Value |
|---|---|
| Type | Switch Mode |
| Output Voltage | 24V dc |
| Output Current | 70A |
| Input Voltage | 230V ac |
| Power Rating | 1500W |
| Width | 126.5mm |
| Depth | 82mm |
| Series | S8VM |
| Maximum Temperature | +50°C |
| Load Regulation | ±0.8% |
| Ripple And Noise | ±1.25% |
| MTBF | 100000h |
| Efficiency | 82% |
| Minimum Temperature | 0°C |