ON Semiconductor, NSBC114EDXV6T1G
- RS Stock No. 186-8954
- Mfr. Part No. NSBC114EDXV6T1G
- Manufacturer ON Semiconductor
This series of digital transistors is designed to replace a single device and its external resistor bias network. The Bias Resistor Transistor (BRT) contains a single transistor with a monolithic bias network consisting of two resistors, a series base resistor and a base-emitter resistor. The BRT eliminates these individual components by integrating them into a single device. The use of a BRT can reduce both system cost and board space.
Simplifies Circuit Design
Reduces Board Space
Reduces Component Count
S and NSV Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements, PPAP capable
These Devices are Pb-Free, Halogen Free/BFR Free
| Attribute | Value |
|---|---|
| Transistor Type | NPN |
| Number of Elements per Chip | 2 |
| Maximum Continuous Collector Current | 100 mA |
| Maximum Collector Emitter Voltage | 50 V dc |
| Typical Input Resistor | 10 kΩ |
| Mounting Type | Surface Mount |
| Base-Emitter Resistor | 10kΩ |
| Package Type | SOT-563 |
| Pin Count | 6 |
| Minimum DC Current Gain | 35 |
| Maximum Power Dissipation | 500 mW |
| Maximum Collector Emitter Saturation Voltage | 0.25 V dc |
| Typical Resistor Ratio | 1 |
| Configuration | Dual |
| Maximum Operating Temperature | +150 °C |
| Height | 0.6mm |
| Automotive Standard | AEC-Q101 |
| Minimum Operating Temperature | -55 °C |
| Length | 1.7mm |
| Dimensions | 1.7 x 1.3 x 0.6mm |
| Width | 1.3mm |
