RS PRO IDM106N Handheld Digital Multimeter, 10A ac 1000V ac 10A dc 1000V dc

  • RS Stock No. 123-3236
  • Manufacturer RS PRO
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): TW
Product Details

RS PRO IDM106N RMS Digital Multimeter

RS PRO IDM106N offers high specification performance with 4000 count display and 42 segment bar graph. These handheld devices can measure capacitance, voltage, electrical current, frequency, peak hold, temperature and resistance with diode and continuity check. This meter has an LCD display where the measurement readouts can be viewed.

RS PRO range of handheld and bench digital multimeters are RS approved meaning that they are great value for money and high quality you can rely on.

Features and Benefits

10 A (continuous) current range
Data hold/relative modes
1 MHz counter with full 9999 Count display
Diode test and continuity sounder
4 nF to 40 μF capacitance ranges
Mains proof resistance ranges
Full autoranging with manual override
Auto power shutdown
Digital display update rate 2 per second
Bargraph display update rate 20 per second
Fused 400 mA and 10A ranges
Dust and water protected to IP64
Water resistant via O-Ring sealed case
Dual high energy fuse protection
AC - Coupled AC conversion true RMS responding to the RMS sine wave input

What does it measure?

DC and AC voltages - up to 1000 V
DC and AC current - up 10A
Resistance and continuity checking - up to 40 MΩ
Capacitance - up to 40 mF
Frequency - up to 400 MHz

Display

The LED-backlit display turns ON/OFF at the touch of a button and automatically turns off to save battery life.

RS-232 Optical Interface

The IDM106N has an RS-232 optical interface to connect to a PC for data acquisition. Allowing measurements to be transferred to a PC for further analysis.

Batteries

Batteries can be easily replaced by unscrewing two screws to remove the battery door for battery replacement. Designed for users convenience without opening the bottom case.

Extra Protection

The multimeter is supplied with a protective holster that includes a built-in stand, a nail hook and convenient test lead storage. This holster provides an extra degree of protection and convenience.

What does it include?

Pair of Test Leads
Battery (Installed)
Test Clips
User Manual
Protective Holster

Typical Applications:
A digital multimeter is a handy test tool that measures electrical values such as voltage, current, and resistance. A DMM is used by technicians in the following areas:
Electrical and electronic industries

Safety guidelines
When using any electrical test equipment it is advised that you refer to the user’s manual for proper working operating procedures and safety precautions in order to avoid potential safety hazards.

What is the difference between an analogue and a digital multimeter?

The main difference is the display. A digital multimeter will show the results as numbers on a screen (usually a LED or LCD screen) whereas the analogue version has a needle to show the value.

Warning

  • When using test leads or probes, keep your fingers behind the finger guards. Remove test lead from the meter before opening the battery door or meter case.
Specifications
Attribute Value
Multimeter Type Handheld
Absolute Maximum AC Current Measurement 10A ac
Absolute Maximum DC Current Measurement 10A dc
Absolute Maximum Resistance Measurement 40MΩ
Absolute Maximum DC Voltage Measurement 1000V dc
Absolute Maximum AC Voltage Measurement 1000V ac
Absolute Maximum Temperature Measurement +800 °C, +1472 °F
Absolute Maximum Capacitance Measurement 40mF
Functions Measured AC Current, AC Voltage, Capacitance, Continuity, DC Current, DC Voltage, Diode Test, Frequency, Peak Hold, Resistance, Temperature
True RMS Yes
Maximum Frequency 400MHz
Display Type LCD
Model Number p IDM106N
DC Current Measurement Resolution 10µA dc
AC Current Measurement Resolution 10µA ac
Resistance Measurement Resolution 100mΩ
AC Voltage Measurement Resolution 0.1mV ac
DC Voltage Measurement Resolution 100µV dc
Capacitance Measurement Resolution 1pF
Height 212mm
Best DC Voltage Accuracy ±0.1% + 2 Digits
Best Temperature Measurement Accuracy ±1 %
Best Capacitance Measurement Accuracy ±2% + 8 Digits
Minimum Operating Temperature 0°C
Best AC Current Accuracy ±1.5% + 5 Digits
Width 55mm
Length 100mm
Dimensions 100 x 55 x 212 (with Holster)mm
Best AC Voltage Accuracy ±1.5% + 5 Digits
Safety Category Level CAT II, CAT III
Battery Life 300 h
Battery Type IEC 6F22, JIS 006P, NEDA 1604, 9V
Safety Category Voltage 600 V, 1000 V
Best DC Current Accuracy ±0.4% + 2 Digits
Maximum Operating Temperature +50°C
Best Resistance Measurement Accuracy ±0.4% + 2 Digits
Weight 620g
Stock check temporarily unavailable - call for stock availability
Price Each
SGD 290.57
(exc. GST)
SGD 310.91
(inc. GST)
units
Per unit
1 +
SGD290.57