SEGGER J-Link BASE

  • RS Stock No. 131-1319
  • Mfr. Part No. 8.08.00 J-LINK BASE
  • Manufacturer SEGGER
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

J-Link BASE Probe

J-Link BASE is a JTAG programming and debug probe supporting a large number of processor cores. J-Link is supported by all major IDEs such as IAR EWARM, Keil MDK, Rowley CrossWorks, Atollic TrueSTUDIO, IAR EWRX, Renesas HEW, Renesas e2studio, and many others.

Supported Processors

• ARM7/9/11, Cortex-A5/A7/A8/A9, Cortex-M0/M1/M3/M4/M7, Cortex-R4/R5
• Microchip PIC32
• Renesas RX100/RX200/RX610/RX621/RX62N/RX62T/RX630/RX631/RX63N

Features

• Direct download into Flash memory of most microcontrollers supported
• Download speed up to 1MB/second
• Supports unlimited breakpoints in Flash memory
• Supports breakpoints in external Flash memory of Cortex-M systems
• Supports concurrent access to CPU by multiple applications
• GDB Server included: allows using J-Link remotely via TCP/IP
• Supports multiple target interfaces: JTAG, SWD
• Supports SWV/SWO (Serial Wire Viewer / Serial Wire Output)
• Wide target voltage range: +1.2V to +3.3V, +5V tolerant
• Supports JTAG chains with multiple devices
• Embedded Trace Buffer (ETB) support
• Various target adapters and optical isolation adapters available
• Powered via USB connector
• Support for adaptive clocking
• All JTAG signals can be monitored, target voltage can be measured
• Target power supply: 300mA with overload protection
• Target interface: JTAG 20-pin
• PC interface: USB 2.0
• Dimensions: 100 x 53 x 27mm
• Cross-platform support (runs on Windows, Linux, Mac OS X)
• Supported by all major IDEs
• Software Developer Kit (SDK) available
• Free software updates, 1 year of support

Target Adapters & Adapter Cables

131-1325 J-Link Target Power Supply Adapter
131-1326 J-Link 10-pin Needle Adapter
131-1327 J-Link RX100/200/600 MCU Adapter
131-1328 J-Link 19-pin ARM Cortex-M MCU Adapter
131-1329 J-Link 9-pin ARM Cortex-M MCU Adapter
131-1330 J-Link 14-pin ARM 7/9/11 MCU Adapter
131-1331 J-Link Microchip PIC32 MCU Adapter

Link Isolator Boards

131-1335 J-Link ARM JTAG Isolator Board
131-1336 J-Link ARM SWD Isolator Board
131-1337 J-Link USB Isolator Board

Supplied with

USB cable, 20-pin ribbon cable

Specifications
Attribute Value
For Use With Flash microcontrollers
59 In stock for delivery within 3 working days
Price Each
SGD 675.74
(exc. GST)
SGD 723.04
(inc. GST)
units
Per unit
1 +
SGD675.74
Related Products
The embOS/IP Switch Board is intended to be ...
Description:
The embOS/IP Switch Board is intended to be mainly a demonstrator board for the Tail Tagging add-on of SEGGER's embedded IP stack embOS/IP. Micrel / Microchip has developed switches which can expand one physical port into 1+n ports, supported by ...
The Renesas RPBRX62N evaluates the RX62N microcontroller and ...
Description:
The Renesas RPBRX62N evaluates the RX62N microcontroller and uses internal communication peripherals such as USB, Ethernet and UART. The device is suitable for advanced embedded applications with its onboard processor (R5F562N8BDFP) which has an internal flash memory of 512 KB ...
The Infineon XMC 2Go Kit with XMC1100 is ...
Description:
The Infineon XMC 2Go Kit with XMC1100 is one of the world’s smallest, fully featured microcontroller evaluation kits. It is deigned to demonstrate the capabilities of the XMC1100 MCU and the free-of-charge software tool chain DAVE™. The board features an ...
The JTAG-SMT2 surface-mount programming module allows high-speed programming ...
Description:
The JTAG-SMT2 surface-mount programming module allows high-speed programming of Xilinx FPGA devices from a host PC. Users can solder the module directly onto a target board like any other component. Note: The JTAG-SMT2-NC part (RS 134-6473) does not have a ...