Hengstler 6 Digit, Digital Counter, 10Hz

  • RS Stock No. 165-576
  • Mfr. Part No. 0 635 812
  • Manufacturer Hengstler
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): SK
Product Details

Totalising Counters - 635 Series

High shock stability
6 digits
Non-resettable
Low power consumption
Maximum count frequency 10Hz
Protection to IP40 front of panel
Mounting with locating spring, electrical connection via wiring posts except 230V unit which uses screw connection
Dimensions: H20 x W30mm

PCB, Surface & DIN Rail Mounting

All units are non-resettable and are continuously rated,Counters may be damaged if connected to inductive loads where high voltage transients may be present. Should this be unavoidable, use a suitable suppression circuit (refer to the Capacitors section) connected across the count or reset coil terminals.,Count rate of all products is 10Hz.

Specifications
Attribute Value
Count Mode Impulses
Input Type Voltage
Connection Type Screw
Reset Method No Reset
Number of Digits 6
Mounting Type Panel Mount
Count Direction Up
Digit Height 4 mm
Maximum Count Frequency 10Hz
Maximum Operating Temperature +50°C
Minimum Operating Temperature -10°C
Weight 20g
Series 635
9 In stock for delivery within 4 working days
Price Each
SGD 32.74
(exc. GST)
SGD 35.03
(inc. GST)
units
Per unit
1 - 4
SGD32.74
5 - 9
SGD31.60
10 +
SGD30.43
Related Products
Used for counting electrical impulses up to a ...
Description:
Used for counting electrical impulses up to a pre-set value which is continuously displayed below the count value, enabling comparisons to be madeIsolated SPDT micro switch changes over when the counter reaches the preselected count value. Change over contact rated ...
6-digit electro-mechanical totalising counters.Counting speed for pulse / ...
Description:
6-digit electro-mechanical totalising counters.Counting speed for pulse / pause ratio = 1:- 20 pulses / sec. in Vdc minimum duration 25 ms / max. unlimited- 10 pulses / sec. in Vac minimum duration 50 ms/max. unlimited.Supplied with plug-in solder clips.Screw ...
The micro adding counter families K 04 to ...
Description:
The micro adding counter families K 04 to K 07 and AK 07 are available in a very wide variety of models and can be used in both DC as well as in AC applications. As panel mount, base mount ...
The Kubler AK07.00 series digital counter is a ...
Description:
The Kubler AK07.00 series digital counter is a 7-digit electromechanical base mount counter has 24VDC supply voltage. As a base mount counter with a very high level of shock resistance, it can be used for numerous diverse application areas. This ...