FlexLink Beam T-Connector, strut profile 44 mm, 88 mm, Groove Size 11mm

  • RS Stock No. 289-9026
  • Mfr. Part No. XCEC 12
  • Manufacturer FlexLink
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): SE
Product Details

T-slot Connector XC

Use to connect beam end to beam side, consists of a threaded shaft, yoke, stop screw and T-slot nut.A 12.2 mm diameter through hole needs to be drilled 22 mm from the end of the beam.,The yoke is placed in the hole and the T-slot nut into the beam side. An Allen key may then be used to tighten the yoke and pull the connector tight. The position of the connector can be easily adjusted.

Specifications
Attribute Value
Structural Element Type Beam
Connector Type T-Connector
Fits Groove Size 11mm
Thread Size M6
Fits Strut Profile 44 mm, 88 mm
Product Family FlexLink
Material Steel
Product System XC
Stock check temporarily unavailable - call for stock availability
Price Each
SGD 5.82
(exc. GST)
SGD 6.23
(inc. GST)
units
Per unit
1 - 9
SGD5.82
10 - 49
SGD5.71
50 - 99
SGD5.63
100 - 199
SGD5.52
200 +
SGD5.42
Related Products
Hirschmann Test and Measurement SEB 2600 G M4, ...
Description:
Hirschmann Test and Measurement SEB 2600 G M4, CAT III 4mm gold plated brass chassis mount touch protected safety test sockets, M12 threaded plastic body (PA) and M4 threaded termination with solder connection. These SEB 2600 G M4 4mm test ...
The Hirschmann test & measurement red, female safety ...
Description:
The Hirschmann test & measurement red, female safety socket is a chassis mount touch protected test socket. It has M12 and 6.3mm x 0.8mm tab connection. These MW SEB 2610 F4.8, 4mm socket are ideal for installation in equipment chassis ...
The Hirschmann test & measurement black, female safety ...
Description:
The Hirschmann test & measurement black, female safety socket is a chassis mount touch protected test socket. It has M12 and 4.8mm x 0.8mm tab connection. These MW SEB 2610 F4.8, 4mm socket are ideal for installation in equipment chassis ...
Hirschmann Test and Measurement SEB 2600 G M4, ...
Description:
Hirschmann Test and Measurement SEB 2600 G M4, CAT III 4mm gold plated brass chassis mount touch protected safety test sockets, M12 threaded plastic body (PA) and M4 threaded termination with solder connection. These SEB 2600 G M4 4mm test ...