The Atmel ZigBit™ USB Stick ATZB-X-233-USB supports the AT86RF233 + ATxmega256A3U MCU wireless module. It is used to evaluate the module while plugged into a USB socket on a PC. The ZigBit module is compatible with a ZigBee stack that supports a self-healing, self-organizing mesh network, while optimizing network traffic and minimizing power consumption.
ZigBit ATZB-X0-256-3-0-CModule USB connector Jumper link for Bootloader enable Header for JTAG programming 2 x User LEDs ZigBit reset pushbutton Pre-programmed bootloader and Performance Analyzer Powered from USB connection
ZigBit ATZB-X0-256-3-0-C Wireless System-on-Module AT86RF233 2.4GHz ISM-Band Transceiver ATxmega256A3U microcontroller with 256KB Flash memory, 4KB EEPROM, 16KB RAM RF Output Power: Up to +3.6dBm Receiver sensitivity: -96dBm Modulation: O-QPSK 16 channels @ 5MHz OTA data rate: 250kbps (IEEE 802.15.4) AES-128 encryption Pre-loaded with Atmel assigned 64-bit MAC address Serial communication: UART, USART, SPI, I2C Up to 32 x GPIO Built-in chip antenna MS-147 RF test connector Power supply: +1.8 to +3.6Vdc Dimensions: 33 x 20 x 3.2mm Applications: Industrial Control, Residential and commercial automation, Security, HVAC control and local communication for the Internet of Things (IoT)