Silicon Labs Si53119-EK, Clock Buffer Evaluation Board for Si53119

  • RS Stock No. 865-1439
  • Mfr. Part No. Si53119-EK
  • Manufacturer Silicon Labs
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

Evaluation board for Si53119, 19 Output PCIe Clock Buffer, Silicon Laboratories

The Si53119-EK by Silicon Laboratories is a PCIe clock & development kit that offers a high performance level per watt for clocking applications necessary to meet PCI Express® Gen1/2/3 standards. These clock generators and buffers have two times lower power and are able to provide up to 50% margin to PCI-Express jitter specifications. Silicon Labs Si53119-EK PCIe Clock Generators and Buffers fully integrate termination resistors, reduce BOM cost, board space requirements and design complexity.

The Si53119 is a 19-output, low-power HCSL differential clock buffer that meets all of the performance requirements of the Intel DB1200ZL specification.

Nineteen 0.7 V low-power, pushpull HCSL PCIe Gen 3 outputs
100 MHz /133 MHz PLL operation, supports PCIe and QPI
PLL bandwidth SW SMBUS programming overrides the latch value from HW pin
9 selectable SMBUS addresses
SMBus address configurable to allow multiple buffers in a single control network 3.3 V supply voltage operation
Separate VDDIO for outputs
PLL or bypass mode
Spread spectrum tolerable
1.05 to 3.3 V I/O supply voltage
50 ps output-to-output skew
50 ps cyc-cyc jitter (PLL mode)
Low phase jitter (Intel® QPI, PCIe Gen 1/Gen 2/Gen 3 compliant)
100 ps input-to-output delay
Extended Temperature: –40 to 85 °C
72-pin QFN

Specifications
Attribute Value
Clock/Timer Function Clock Buffer
Kit Classification Evaluation Board
Featured Device Si53119
Temporarily out of stock - back order for despatch 26/08/2020, delivery within 4 working days from despatch date
Price Each
SGD 193.34
(exc. GST)
SGD 206.87
(inc. GST)
units
Per unit
1 +
SGD193.34
Related Products
High-performance aluminium die cast housing/epoxy greyCover with built-‑in ...
Description:
High-performance aluminium die cast housing/epoxy greyCover with built-‑in rubber seal and rust-proof mounting boltsFixing centres and cover mounting bolts are located on the outside of the seal - protection level IP66Each housing with internal tie positions for attaching panels, terminals, ...
This evaluation board serves as an aid in ...
Description:
This evaluation board serves as an aid in evaluating circuit protection on RS-485 serial device port solutions using Bourns® TBU® High-Speed Protectors (HSPs), Metal Oxide Varistors (MOVs) and Transient Voltage Suppressor (TVS) products designed to meet the required industry standards ...
The HFBR-0528Z kit from Avago Technologies, facilitates the ...
Description:
The HFBR-0528Z kit from Avago Technologies, facilitates the evaluation of DC to 10MBd high performance 650nm transmitter HFBR-1528Z and receiver HFBR-2528Z (stock no. 236-846). Fitted with SMA connectors, the HFBR-0528Z evaluation board makes it easy to connect a waveform/pattern generator ...
The CY15FRAMKIT-002 kit is an easy-to-use and inexpensive ...
Description:
The CY15FRAMKIT-002 kit is an easy-to-use and inexpensive development kit for evaluating Cypress new high-performance Excelon™ Ultra QSPI F-RAM. On-board 4-Mbit (512Kx8), Excelon Ultra Quad SPI F-RAM with 1.8V to 3.6V operating voltageCompatible with ST NUCLEO-L433RC-P MCU Evaluation Board for ...