MikroElektronika MIKROE-764

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): CS
Product Details

MikroElektronika Programmer

The MikroElektronika programmer comes with mikroICD™ hardware in-circuit debugger. Smart engineering allows mikroProg to support PIC10, PIC12, PIC16, PIC18, dsPIC30/33, PIC24 and PIC32 devices in a single programmer. It supports over 1000 microcontrollers from Microchip. Outstanding performance, easy operation and elegant design are its top features. You can debug your code and monitor code execution on the chip itself. The mikroProg™ technology brings the power of hardware debugging to your favourite compiler.
Kit contents:
1 x mikroProg™ programmer with mikroICD™ support
1 x USB Mini-B Cable
1 x User Manual
1 x DVD with documentation and code examples

Features and Benefits

Can provide power to the target board-Configurable up to 150mA with voltage ranging between 1.8V and 5V
Compatible with PICflash
Four LEDs for power, data transfer, link and active indication
One firmware, easily upgraded via download to support new devices
SingleClick™ debugging
Supports Microchip PIC10, PIC12, PIC16, PIC18, dsPIC30/33, PIC24 and PIC32 microcontroller devices

46 In stock for delivery within 4 working days
Price Each
Was SGD152.17
SGD 138.74
(exc. GST)
SGD 148.45
(inc. GST)
units
Per unit
1 - 9
SGD138.74
10 - 49
SGD138.68
50 +
SGD138.61
Related Products
The SPC5-UDESTK is a USB/JTAG interface to enable ...
Description:
The SPC5-UDESTK is a USB/JTAG interface to enable the debugging and programming of the 32-bit SPC56 and SPC57 microcontrollers for automotive applications. It offers a collection of tools; including source file management, project building and a powerful HLL debugger. It ...
The Microchip Technology MPLAB snap debugger programmer is ...
Description:
The Microchip Technology MPLAB snap debugger programmer is a powerful 32-bit 300MHz SAM E70 Arm® Cortex®-M7 based MCU meant for quicker debug iterations. This MPLAB programmer supports 4-wire JTAG and serial wire debug with streaming data gateway. It is also ...
The Leaper-5E is a battery or mains powered ...
Description:
The Leaper-5E is a battery or mains powered USB Handy MCS-51 Writer. Supports a wide range of Devices like Atmel, Hyundai, Intel, Issi, Philips, SST, Temic and Winbond. High performance on programming Atmel AT89S52 only 4 seconds to erase, blank ...
The NXP flash programmer FX is a high-speed, ...
Description:
The NXP flash programmer FX is a high-speed, all-in-one development interface which allows a PC access to the Background Debug Mode (BDM) or JTAG interface on Freescale Kinetis, Qorivva 55xx/56xx, ColdFire V1/+V1, ColdFire V2-4, HCS08, RS08, HC(S)12(X), DSC and HC16/683xx ...