Legrand Cantilever Arm Bracket Stainless Steel Cable Tray Fixing Plate, 75 mm Width, 65mm Depth

  • RS Stock No. 163-3076
  • Mfr. Part No. LCA75S
  • Manufacturer Legrand
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): GB
Product Details

Cantilever arms enable horizontal runs of cable tray to be mounted to vertical steel, concrete or masonry surfaces or to Swiftrack channel They are available in ten sizes to accommodate all tray widths Cantilever arms are of fabricated construction with a bottom flange on arms 225 mm wide and above for extra strength Supplied singly without fasteners

Specifications
Attribute Value
Accessory Type Cantilever Arm Bracket
Material Stainless Steel
Corrosion Protection Type Stainless Steel
Series LCA
Depth 65mm
Duty Type Heavy Duty, Light Duty, Medium Duty
For Use With Flat Surface Tray, Swiftrack Channel
Width 75 mm
Tray and Basket Type Cable Tray
7 In stock for delivery within 4 working days
Price Each
Was SGD25.17
SGD 23.63
(exc. GST)
SGD 25.28
(inc. GST)
units
Per unit
1 - 9
SGD23.63
10 +
SGD21.98
Related Products
Bends, risers, tee pieces, and couplers The bends ...
Description:
Bends, risers, tee pieces, and couplers The bends and risers are adjustable between 0° and 90° The coupler set will join two lengths of tray.
The Cablofil International cable tray is a bend ...
Description:
The Cablofil International cable tray is a bend connector from the CM series. It is made of 316 stainless steel material and is 100mm wide. It used in pairs on side rails for steel cable tray. Plated with ecologic zinc, ...
There are three alternative methods of fitting trapeze ...
Description:
There are three alternative methods of fitting trapeze hangers to threaded rods as shown below. All three methods are applicable to trapeze hangers for–600-900“€€mm widths but only type ‰ applies to narrower trapeze hangers. The recommended safe working load for ...
CeeLok FAS-T clamping band for use with the ...
Description:
CeeLok FAS-T clamping band for use with the BNX series MIL-C-38999 bandstrap adaptors (see stock number 765-0176 typically). This CeeLok FAS-T clamping band is made from 300 series passivated corrosion resisting steel and is for use with adaptors with a ...