Siemens 3 Phase Busbar, 400V ac, 1mm Pitch

  • RS Stock No. 124-3143
  • Mfr. Part No. 5ST3710
  • Manufacturer Siemens
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): DE
Product Details

Series 5ST3 7 Bus-Bar System

With pin connections
Cut-to-length bar
For 1 or 3-phase line protective switches of the series 5SJ6 and 5SY
No additional connection terminal required for stranded connection up to 35mm²
Excellent accessibility for feeder cable
50→90A load at infeed single-sided/in-centre for 10mm²; 65→120A for 16mm²
Pin type connection
Material: Cu (10mm²); 16mm² fully insulated
Lug spacing: 18mm

Standards

DIN 57606, DIN 57659

Siemens Distribution Boards & Accessories

Type B characteristic offers instantaneous short circuit response level of 3-5 x normal rated current, making it suitable for circuits with moderate inrush currents such as filament lamps, heating loads and most domestic/small building protection applications.,Type C characteristic offers short circuit response of 5-10 x normal rated current, making it ideal for circuits with higher inrush currents such as motor control and fluorescent lighting installations in industrial buildings where nuisance tripping might occur if a faster type was used.

Specifications
Attribute Value
Rated Operational Voltage 400V ac
Material Copper
Range Sentron
Electrical Phase 3
Current Rating 80 A
For Use With 3P Miniature Circuit Breakers
Series 5ST
Pitch 1mm
7 In stock for delivery within 5 working days
Price Each
SGD 161.25
(exc. GST)
SGD 172.54
(inc. GST)
units
Per unit
1 +
SGD161.25
Related Products
Splitters for XE plug-in technology.A connector combined with ...
Description:
Splitters for XE plug-in technology.A connector combined with a splitter supplies two rows. stock no. 145-279.Rated operating current: 63 A @ 40 °C.Rated insulating voltage: 250 VacMounting on support provided at the back of the symmetrical rail on Opale and ...
The connection busbars ensure correct installation of all ...
Description:
The connection busbars ensure correct installation of all "Prodis compatible" systems; DT 40 (1P+N and 3P+N), TL, CT, ITG 40, CM, etc.The busbars can be cut using a saw.
Professional range of ABB distribution busbars and endcaps. ...
Description:
Professional range of ABB distribution busbars and endcaps. Wide range of electrical phases, operational voltages and number of modules to choose from. Various electrical phases availableWide range of operational voltagesGood selection and choice regarding the 'Number of Modules' required.
The bus terminal is used for connecting the ...
Description:
The bus terminal is used for connecting the bus line to EIB devices such as flush-mounted bus couplers, couplers and 4-fold connectors as well as for looping or branching of the bus cableWhen connecting the bus cable, the correct polarity ...