Heat Guns

Heat Guns are a hand held tool that uses a stream of hot air which is heated by a built-in element at temperatures between 100°C and 550°C. Heavy duty heat guns operate at hotter temperatures of plus 700°C. Heat Guns allow you to concentrate the heat onto a targeted area or surface also give you control using the on and off trigger.
If you need advice on how to use these tools, you can consult our Heat Guns Guide.

How A Heat Gun Works:
The heat used by the Heat Gun is produced by a fan built into the back of the gun within the gun which draws air in and then passes the cold air over the heating elements which then creates the required stream of hot air.

How To Use A Heat Gun:
Heat Guns should be held at an angle of 45° from the area you target but never hold the stream of heated air in one place for more than a few seconds as you could damage and burn your work surface. When stripping paint from a surface use the Heat Gun to soften the paint until it bubbles and blisters. Remove the Heat Gin from the surface then use a scraper to remove the paint from the work surface.

Uses for Heat Guns:
  • Stripping Paint including lead paint (lead paint, use temperatures below 590° minimising vaporisation)
  • Heat Shrink Tubing
  • Shrink Film
  • Shrink Wrap Packaging
  • Wood - helps to dry out damp wood
  • Plastic – assists help in welding, bending and shaping plastic
  • Adhesive softening
  • Thawing frozen pipes
  • Electronics – De-soldering
  • Rework surface-mounted circuit boards

...
Read more Read less

Filters

Viewing 1 - 14 of 14 products
Results per page
Description Price Maximum Airflow Wattage Voltage Rating Maximum Operating Temperature Plug Type Outlet Diameter Weight Model Number Soldering Tip Temperature Tasks Supported Number of Outputs
RS Stock No. 124-5159
BrandRS PRO
SGD72.28
Each
units
550L/min 1.6kW 240V +500°C Type C - EuroPlug - 750g - - - -
RS Stock No. 124-5158
BrandRS PRO
SGD73.42
Each
units
500L/min 2kW 220 → 240V +550°C Type C - EuroPlug, Type G - British 3-pin - 750g - - - -
RS Stock No. 520-2914
Mfr. Part No.009663
BrandSteinel
SGD358.34
Each
units
500L/min 2.3kW 240V +650°C Type G - British 3-pin 34mm 940g HG2320E - - -
RS Stock No. 489-541
Mfr. Part No.HG651CK
BrandMakita
SGD298.35
Each
units
550m³/min 2kW 240V ac +650°C Type C - EuroPlug - 780g HG651CK - - -
RS Stock No. 522-2198
Mfr. Part No.012700
BrandSteinel
SGD230.72
Each
units
500L/min 2.3kW 230V +650°C Type C - EuroPlug 34mm 940g HG2320E - - -
RS Stock No. 445-3436
Mfr. Part No.6966EK
BrandWeller
SGD401.03
Each
units
- 250W 240V ac +427°C Type F - Schuko plug - 368g 6966E - - -
RS Stock No. 520-2920
Mfr. Part No.012694
BrandSteinel
SGD235.70
Each
units
500L/min 1.4kW 110V +650°C BS 4343 34mm 940g HG2320E - - -
RS Stock No. 325-3184
Mfr. Part No.0126011
BrandSteinel
SGD784.73
Each
units
500L/min 2.3kW 110V +700°C BS 4343 30mm 840g HG2620E - - -
RS Stock No. 325-3190
Mfr. Part No.3501541
BrandSteinel
SGD838.40
Each
units
800L/min 3.4kW 230V +600°C Type G - British 3-pin 50mm 1.2kg HG5000E - - -
RS Stock No. 104-367
Mfr. Part No.21898000
BrandRapid
SGD112.04
Each
units
500L/min 2kW 220 → 240V ac +600°C Type C - EuroPlug - 1.2kg - - - -
RS Stock No. 820-8555
Mfr. Part No.882
BrandHakko
SGD251.93
Each
units
- 1kW - - - - - 882 +450°C Hot Air 1
RS Stock No. 543-049
Mfr. Part No.HG5000E
BrandSteinel
SGD936.71
Each
units
800L/min 3.4kW 230V +600°C Type I - Australian plug 50mm 1.2kg HG5000E - - -
RS Stock No. 146-8764
Mfr. Part No.SLS.GKIT1-GUN
BrandFacom
SGD1,249.97
Each
units
- - - - - - - SLS.G - - -
New
RS Stock No. 188-3888
Mfr. Part No.E.2015
BrandFacom
SGD296.20
Each
units
250 (Mode1) L/min, 500 (Mode2) L/min 2000W 220 → 240V +600°C Type C - EuroPlug 72mm 980g E.2015 - - -
Related Products
Special version designed for removing dust, debris and ...
Description:
Special version designed for removing dust, debris and swarf from blind holes up to 18 inches deepPlastic probe jets high pressure air into the hole to dislodge particles which are safely sucked away by the main nozzleMain nozzle shrouded to ...
The 27102 series blow guns are ergonomicaly designed ...
Description:
The 27102 series blow guns are ergonomicaly designed and feature a hardwearing scratch resistant composite body. • Smooth shape and finish prevents dust and filings build up on trigger and case. • Directional jet • Brass insert connection • Smooth ...
High blowing forceEasily regulated infinite blowValve package allowing ...
Description:
High blowing forceEasily regulated infinite blowValve package allowing gun to handle both air and non-explosive liquidsLeft and right hand operatedLightweight designHook for easy storage and hangingErgonomic Acetalplastic handle designed to shield against cold air flowAirflow: 500l/min.
A micro processor controlled single output rework station ...
Description:
A micro processor controlled single output rework station with digital display of temperature for the repair/rework of PCB's with through hole componentsStation can drive all 'Temtronic' toolsAutomatic tool recognitionSelf calibratingDigital display of set, read and actual tempTemperature setting by push ...