MOSFET Drivers

Mosfet drivers are dedicated drivers that apply low voltage and provide drive current to power devices like MOSFET or IGBT.

What do they do?

A gate driver or mosfet driver is a power amplifier that provide the high and low output voltage to turn the mosfet on or off. Ideally suitable for driving power mosfets in inverter and converter applications.

What are they also known as?

  • Gate drivers
  • Mosfet gate drivers
  • Gate Drive Optocouplers

Types of mosfet drivers

Low side drivers; low side generally means the neutral or common side of the load. Low side output channels to control mosfets typically drive LEDs, relays and motors.

High side drivers; high side basically means the power supply +Vcc/Vdd side of the load. High side output channels to control mosfets are better for turning power rails on and off. They are usually driven by an output pin configured as an open-drain (OD).

Mounting types

We supply mosfet drivers with a surface mount or through-hole configuration so they can be soldered to a circuit board.

Bridge type drivers

Half Bridge Drivers: designed for applications that require high power uni-directional DC motors, three-phase brushless DC motors, or other inductive loads.

Full Bridge Drivers: a full-bridge controller for use with external N-channel power mosfets and is designed for automotive applications with high-power inductive loads.

3 Phase Drivers: designed for pulse width modulated (PWM) current control of 3-phase, brushless DC motors.


Mosfet drivers are found in a variety of applications like home appliances, Industrial heating Motor control and drives.

Read more Read less


Viewing 1741 - 1744 of 1744 products
Results per page
Description Price Number of Drivers Minimum Operating Supply Voltage Maximum Operating Supply Voltage Topology Mounting Type Peak Output Current Number of Outputs Polarity Package Type Pin Count Bridge Type Input Logic Compatibility High and Low Sides Dependency Automotive Standard
RS Stock No. 184-5228
Mfr. Part No.BS2132F-E2
Each (On a Reel of 1500)
6 11.5 V 20 V Three Phase Surface Mount - 6 Non-Inverting SOP 28 Three Phase 3.3 V, 5 V - -
RS Stock No. 2509532200
Mfr. Part No.TC4424CPA
- - - - - - - - - - - - - -
RS Stock No. 2509571019
Mfr. Part No.SKHI 10/17
- - - - - - - - - - - - - -
RS Stock No. 2509532272
Mfr. Part No.TC4428EOA
- - - - - - - - - - - - - -
Related Products
A range of full-bridge drivers designed to control ...
A range of full-bridge drivers designed to control MOSFET and IGBT power devices in 3-phase applications. The devices feature a maximum blocking voltage of 600 V and low-side control using CMOS and TTL compatible signal levels.
The HIP2103-4DEMO1Z Demonstration Board, is a general purpose ...
The HIP2103-4DEMO1Z Demonstration Board, is a general purpose motor drive module with a microprocessor controller on-board. It uses a PIC microcontroller to control the HIP2103 and the HIP2104 half bridge drivers with six MOSFETs.The HIP2103-4DEMO2Z Demonstration Board integrates the HIP2103 ...
The MIC4103 and MIC4104 are high frequency, 100V ...
The MIC4103 and MIC4104 are high frequency, 100V Half Bridge MOSFET drivers with faster turn-off characteristics than the MIC4100 and MIC4101 drivers. They feature fast 24ns propagation delay times and 6ns driver fall times. Asymmetrical, low impedance outputs drive 1000pF ...
The MIC4605 is an 85V half-bridge MOSFET driver ...
The MIC4605 is an 85V half-bridge MOSFET driver that features adaptive-dead-time and shoot-through protection. The adaptive-dead-time circuitry actively monitors the half-bridge outputs to minimize the time between high-side and low-side MOSFET transitions, thus maximizing power efficiency. 5.5V to 16V gate ...