Pneumatic Pin Cylinders

Pneumatic pin (needle) cylinders are compact (space saving) mechanical devices that transform compressed air power into linear forces to drive a mechanical motion. A cylinder consists of a piston, rod and plunger surrounded by a cylindrical bore.

These cylinders occupy less space than other pneumatic cylinders because components like switches can be mounted onto them via panel (on top of device) or embedded mounting (inside device).

Their bodies are made of brass and the rods are constructed of stainless steel for extra durability. They do not require additional lubrication which makes them relatively maintenance free.

What are pneumatic pin cylinders used for?

Pin cylinders are used for precision parts assembling in tight spaces. For example during automated soldering activities where components to be joined (soldered) are located behind panel enclosures and can only be accessed through tiny openings.

Types of pneumatic pin cylinders

  • Single acting means there is one port from where the compressed air flows to push the rod out. The rod is then retracted with a spring mechanism.
  • Double acting means there are two ports from which compressed air can flow out and back in to push and retract the rod.

...
Read more Read less

Filters

Viewing 21 - 40 of 49 products
Results per page
Description Price Manufacturer Series Action Bore Stroke Piston Speed Maximum Operating Pressure Absolute Maximum Pressure Cushioning Type Force at 7 bar Port Connection Dimensions Weight Minimum Piston Speed Diameter
RS Stock No. 547-635
Mfr. Part No.CDJP2B6-25D
BrandSMC
SGD57.16
Each
units
CJP2 Double 6mm 25mm 50 → 500mm/s 0.7 MPa - Rubber - M3 x 0.5 58 x 14 x 16.5mm 25g 50mm/s -
RS Stock No. 547-556
Mfr. Part No.CDJP2B6-15D
BrandSMC
SGD54.08
Each
units
CJP2 Double 6mm 15mm 50 → 500mm/s 0.7 MPa - Rubber - M3 x 0.5 48 x 14 x 16.5mm 21g 50mm/s -
RS Stock No. 890-3257
Mfr. Part No.CDJ2B16-45Z-B
BrandSMC
SGD72.38
Each
units
- Double 16mm 45mm 50 → 750mm/s 0.7 MPa 1.05MPa Rubber - M5 x 0.8 120 x 18 x 18mm 55g 50mm/s -
RS Stock No. 183-3974
Mfr. Part No.CJPB10-5H6
BrandSMC
SGD38.68
Each
units
CJP Single 10mm 5mm 50 → 500mm/s 0.7 MPa - Not Cushioned - M5 x 0.8 32.5 x 19 x 22mm 28g 50mm/s -
RS Stock No. 890-3247
Mfr. Part No.CDJ2B10-60Z-B
BrandSMC
SGD62.56
Each
units
- Double 10mm 60mm 50 → 750mm/s 0.7 MPa 1.05MPa Rubber - M5 x 0.8 134 x 12 x 12mm 24g 50mm/s -
RS Stock No. 547-574
Mfr. Part No.CDJP2B16-15D
BrandSMC
SGD67.54
Each
units
CJP2 Double 16mm 15mm 50 → 500mm/s 0.7 MPa - Rubber - M5 x 0.8 58.5 x 20 x 24.5mm 50g 50mm/s -
RS Stock No. 183-4006
Mfr. Part No.CJPB15-10H6
BrandSMC
SGD51.51
Each
units
CJP Single 15mm 10mm 50 → 500mm/s 0.7 MPa - Not Cushioned - M5 x 0.8 43.5 x 27 x 31mm 82g 50mm/s -
RS Stock No. 547-619
Mfr. Part No.CDJP2B10-5D
BrandSMC
SGD57.08
Each
units
CJP2 Double 10mm 5mm 50 → 500mm/s 0.7 MPa - Rubber - M3 x 0.5 44.5 x 15 x 19mm 27g 50mm/s -
RS Stock No. 890-3235
Mfr. Part No.CDJ2B10-30Z-B
BrandSMC
SGD57.53
Each
units
- Double 10mm 30mm 50 → 750mm/s 0.7 MPa 1.05MPa Rubber - M5 x 0.8 104 x 12 x 12mm 24g 50mm/s -
RS Stock No. 547-578
Mfr. Part No.CDJP2B16-30D
BrandSMC
SGD72.07
Each
units
CJP2 Double 16mm 30mm 50 → 500mm/s 0.7 MPa - Rubber - M5 x 0.8 73.5 x 20 x 24.5mm 63g 50mm/s -
RS Stock No. 547-631
Mfr. Part No.CDJP2B16-40D
BrandSMC
SGD75.05
Each
units
CJP2 Double 16mm 40mm 50 → 500mm/s 0.7 MPa - Rubber - M5 x 0.8 83.5 x 20 x 24.5mm 71g 50mm/s -
RS Stock No. 547-518
Mfr. Part No.CDJP2B10-35D
BrandSMC
SGD65.39
Each
units
CJP2 Double 10mm 35mm 50 → 500mm/s 0.7 MPa - Rubber - M3 x 0.5 74.5 x 15 x 19mm 43g 50mm/s -
New
RS Stock No. 200-3544
Mfr. Part No.CJPS6-15
BrandSMC
SGD26.78
Each
units
CJP Single 6mm 15mm - - - - - - - - - -
RS Stock No. 547-552
Mfr. Part No.CDJP2B10-40D
BrandSMC
SGD67.54
Each
units
CJP2 Double 10mm 40mm 50 → 500mm/s 0.7 MPa - Rubber - M3 x 0.5 79.5 x 15 x 19mm 45g 50mm/s -
RS Stock No. 547-546
Mfr. Part No.CDJP2B6-20D
BrandSMC
SGD55.68
Each
units
CJP2 Double 6mm 20mm 50 → 500mm/s 0.7 MPa - Rubber - M3 x 0.5 53 x 14 x 16.5mm 23g 50mm/s -
RS Stock No. 547-613
Mfr. Part No.CDJP2B16-20D
BrandSMC
SGD69.02
Each
units
CJP2 Double 16mm 20mm 50 → 500mm/s 0.7 MPa - Rubber - M5 x 0.8 63.5 x 20 x 24.5mm 54g 50mm/s -
RS Stock No. 849-7522
Mfr. Part No.NCJ2B16-100
BrandSMC
SGD60.52
Each
units
NCJ2B16 Double 16mm 25.4mm 50 → 750mm/s 0.7 MPa 1MPa Rubber - 10-32 UNF 18.03 (Dia.) x 74.93 (L)mm 98g 50mm/s 18.03mm
RS Stock No. 547-530
Mfr. Part No.CDJP2B16-25D
BrandSMC
SGD70.49
Each
units
CJP2 Double 16mm 25mm 50 → 500mm/s 0.7 MPa - Rubber - M5 x 0.8 68.5 x 20 x 24.5mm 58g 50mm/s -
RS Stock No. 547-629
Mfr. Part No.CDJP2B6-5D
BrandSMC
SGD51.12
Each
units
CJP2 Double 6mm 5mm 50 → 500mm/s 0.7 MPa - Rubber - M3 x 0.5 38 x 14 x 16.5mm 16g 50mm/s -
RS Stock No. 547-502
Mfr. Part No.CDJP2B16-5D
BrandSMC
SGD64.54
Each
units
CJP2 Double 16mm 5mm 50 → 500mm/s 0.7 MPa - Rubber - M5 x 0.8 48.5 x 20 x 24.5mm 42g 50mm/s -
Related Products
Single and double-acting compact short-stroke cylinders, operating with ...
Description:
Single and double-acting compact short-stroke cylinders, operating with lubricated or non-lubricated filtered compressed air. CO5 series cylinders are easy to install in confined spaces, easy to clean, and offer good corrosion resistance. The cylinders are supplied pre-lubricated (for applications where ...
The CQS Series of Compact Cylinders is available ...
Description:
The CQS Series of Compact Cylinders is available for those small bore cylinder applications. Both switch capable and non-switch capable body styles are the same. Space and weight savingMagnetic or non-magnetic pistons availableProof pressure 15 barInternal thread rod ends Nitrile ...
Compact single and double acting cylinders, considerably shorter ...
Description:
Compact single and double acting cylinders, considerably shorter than corresponding tie rod designs. Space and weight savingMagnetic pistonProof pressure 15barOperating pressure range 0.05MPa (0.51kgf/cm2) min to 10bar maxSupplied with tapered and parallel ports.
Bore sizes 6, 10, 16mmMagnetic piston standardCompact designLubrication ...
Description:
Bore sizes 6, 10, 16mmMagnetic piston standardCompact designLubrication not requiredMale-threaded rod endIP67 ratedProof pressure 1.05 barOperating pressure 1.2 bar, 6mm dia and 0.6 bar, 10mm/16mm dia (min) 7 bar (max)Ambient and fluid temperature -10ºC to +60°CStroke tolerance +1.0mm, -0mmRubber bumper ...