Pneumatic Straight Tube-to-Tube Adaptors

Pneumatic technology uses pressured gas to drive some sort of mechanical motion. The most common gas used in pneumatic technology is dry air. The air must be dry as moisture has different compressive qualities. Pneumatic technology is very similar to hydraulic technology, however the fluid used to drive the motion here is always a liquid.

Pneumatic systems are operated using a central pneumatic device (such as an air motor or compressor) and utilise manual or automatic solenoid valves to control the airflow around the system.

Pneumatic systems contain many components, pneumatic straight tube to tube adaptors being one example.

What are pneumatic straight tube to tube adaptors used for?

Pneumatic straight tube-to-tube adaptors are used to connect two tubes together. Straight adapters do not change the tube direction and most work with a range of materials such as nylon, polyurethane and polyamide.

Types of pneumatic straight tube to tube adaptors

Pneumatic straight tube-to-tube adaptors come in a variety of diameters, sizes, and materials. Some are nickel-plated brass and others feature glass-filled nylon.


...
Read more Read less

Filters

Viewing 1 - 20 of 355 products
Results per page
Description Price Manufacturer Series Tube Connection A Tube Connection B Body Material Finish Maximum Operating Pressure Minimum Operating Temperature Chemical Resistant Food Grade Tube Connection B - Type Tube Connection A - Tube Size Tube Connection A - Type Tube Connection B - Tube Size Maximum Operating Temperature
RS Stock No. 771-5071
Mfr. Part No.KQ2H06-00A
BrandSMC
SGD3.734
Each (In a Pack of 5)
units
KQ2 Push In 6 mm Push In 6 mm PBT - 10 bar -5°C - - Push In 6mm Push In 6mm +60°C
RS Stock No. 812-106
Mfr. Part No.3106 06 00
BrandLegris
SGD4.27
Each (In a Pack of 5)
units
3106 Push In 6 mm Push In 6 mm Glass Reinforced Nylon - 20 bar -20°C - - Push In 6mm Push In 6mm +80°C
RS Stock No. 771-5614
Mfr. Part No.KQ2R06-08A
BrandSMC
SGD5.066
Each (In a Pack of 5)
units
KQ2 Plug In 6 mm Plug In 8 mm PBT - - -5°C - - Plug In 6mm Plug In 8mm +60°C
RS Stock No. 704-2852
Mfr. Part No.PM201006E
BrandJohn Guest
SGD19.24
1 Bag of 5
Bag(s)
PM Push In 10 mm Push In 6 mm Acetal Copolymer - 10 bar -20°C - - Push In 10mm Push In 6mm +65°C
RS Stock No. 400-2915
Mfr. Part No.KQ2N08-99
BrandSMC
SGD2.972
Each (In a Pack of 5)
units
KQ2 Push In 8 mm Push In 8 mm PBT - 1 MPa -5°C - - Push In 8mm Push In 8mm +60°C
RS Stock No. 182-5327
Mfr. Part No.3106 08 00
BrandLegris
SGD4.60
Each (In a Pack of 5)
units
3106 Push In 8 mm Push In 8 mm Glass Reinforced Nylon - 20 bar -20°C - - Push In 8mm Push In 8mm +80°C
RS Stock No. 619-0878
Mfr. Part No.3106 06 08
BrandLegris
SGD7.55
Each (In a Pack of 5)
units
3106 Push In 6 mm Push In 8 mm Glass Reinforced Nylon - 20 bar -20°C - - Push In 6mm Push In 8mm +80°C
RS Stock No. 327-2466
Mfr. Part No.3166 08 12
BrandLegris
SGD6.734
Each (In a Pack of 5)
units
3166 Plug In 8 mm Plug In 12 mm Glass Reinforced Nylon - 20 bar -20°C - - Plug In 8mm Plug In 12mm +80°C
RS Stock No. 265-5359
Mfr. Part No.3166 04 10
BrandLegris
SGD6.12
Each (In a Pack of 5)
units
3166 Plug In 4 mm Plug In 10 mm Glass Reinforced Nylon - 20 bar -20°C - - Plug In 4mm Plug In 10mm +80°C
RS Stock No. 771-5099
Mfr. Part No.KQ2H06-08A
BrandSMC
SGD8.14
Each (In a Pack of 5)
units
KQ2 Push In 6 mm Push In 8 mm PBT - - -5°C - - Push In 6mm Push In 8mm +60°C
RS Stock No. 771-5138
Mfr. Part No.KQ2H08-00A
BrandSMC
SGD6.58
Each (In a Pack of 5)
units
KQ2 Push In 8 mm Push In 8 mm PBT - - -5°C - - Push In 8mm Push In 8mm +60°C
RS Stock No. 771-5116
Mfr. Part No.KQ2H07-00A
BrandSMC
SGD10.796
Each (In a Pack of 5)
units
KQ2 Push In 1/4 in Push In 1/4 in PBT - - -5°C - - Push In 1/4in Push In 1/4in +60°C
RS Stock No. 182-5333
Mfr. Part No.3106 10 00
BrandLegris
SGD7.712
Each (In a Pack of 5)
units
3106 Push In 10 mm Push In 10 mm Glass Reinforced Nylon - 20 bar -20°C - - Push In 10mm Push In 10mm +80°C
RS Stock No. 771-5204
Mfr. Part No.KQ2H12-00A
BrandSMC
SGD8.902
Each (In a Pack of 5)
units
KQ2 Push In 12 mm Push In 12 mm PBT - 10 bar -5°C - - Push In 12mm Push In 12mm +60°C
RS Stock No. 743-8821
Mfr. Part No.KK130S-08H
BrandSMC
SGD114.05
1 Bag of 5
Bag(s)
KK130 Push In 8 mm - Stainless Steel Zinc Chromated 1 MPa -5°C - - - 8mm Push In - +60°C
RS Stock No. 771-5608
Mfr. Part No.KQ2R04-08A
BrandSMC
SGD4.978
Each (In a Pack of 5)
units
KQ2 Plug In 4 mm Plug In 8 mm PBT - - -5°C - - Plug In 4mm Plug In 8mm +60°C
RS Stock No. 771-5046
Mfr. Part No.KQ2H04-00A
BrandSMC
SGD3.792
Each (In a Pack of 5)
units
KQ2 Push In 4 mm Push In 4 mm PBT - 10 bar -5°C - - Push In 4mm Push In 4mm +60°C
RS Stock No. 771-5153
Mfr. Part No.KQ2H08-10A
BrandSMC
SGD9.966
Each (In a Pack of 5)
units
KQ2 Push In 8 mm Push In 10 mm PBT - 10 bar -5°C - - Push In 8mm Push In 10mm +60°C
RS Stock No. 771-5620
Mfr. Part No.KQ2R08-10A
BrandSMC
SGD6.008
Each (In a Pack of 5)
units
KQ2 Plug In 8 mm Plug In 10 mm PBT - 10 bar -5°C - - Plug In 8mm Plug In 10mm +60°C
RS Stock No. 326-9101
Mfr. Part No.3166 04 06
BrandLegris
SGD3.42
Each (In a Pack of 5)
units
3166 Plug In 4 mm Plug In 6 mm Glass Reinforced Nylon - 20 bar -20°C - - Plug In 4mm Plug In 6mm +80°C
Related Products
This range came up to answer the most ...
Description:
This range came up to answer the most extreme demands of pneumatic automation. It is a line in technopolymer , lighter and more compact which offers to demanding customers high performances. Wide Range ø 2 - 14 mm. Main advantages:Quick ...
Connection at a 90° angle of 3 tubes ...
Description:
Connection at a 90° angle of 3 tubes of equal or different diameters. compact, solid construction, aesthetic and unobtrusive for a better connection, full air flow, individual unit quality control and dating in order to guarantee quality and traceability, RoHS ...
Metric size fittings especially produced for use on ...
Description:
Metric size fittings especially produced for use on air, potable liquids, foodstuff, pneumatic applications, inert gases & vacuum.
Enots compression fittings are ideal for most general ...
Description:
Enots compression fittings are ideal for most general industrial applications. Manufactured entirely from extruded brass bar or hot brass stampings, they can be used under extreme conditions of pressure and temperature, limited for all practical purposes only by the tubing ...