Hydraulic Blanking Plugs

Hydraulic blanking plugs provide a temporary or permanent way of covering holes in high-pressure hydraulic devices. By sealing holes you can help to prevent leaks and ensure the device operates properly. Depending on their material, hydraulic blanking plugs are resistant to corrosion, oil and most chemicals. They have a threaded shaft and a flat head with a washer.

What are hydraulic blanking plugs used for?

Hydraulic blanking plugs are used in high pressure fluid applications such as presses, pumps, cylinders, valves, relays, motors, transmissions and turbos. Any blow-off or fault is prevented with a visible hydraulic bite rings on the progressive ring. Stress is evenly distributed throughout which minimises concentration at the bite point.

How to choose the right hydraulic blanking plugs

Hydraulic systems work at high pressures, applying extreme load and vibration to fittings. When choosing the right hydraulic blanking plugs, the technical specifications should be carefully considered. These factors include maximum temperature and pressure, as well as material. Steel hydraulic blanking plugs have a high resistance to corrosion, and plastic plugs are solvent, oil, grease and chemical resistant.


...
Read more Read less

Filters

Viewing 1 - 20 of 34 products
Results per page
Description Price Material Finish Head Hex Type Thread Length Overall Length Thread Standard Thread Size Maximum Operating Temperature Minimum Operating Temperature Maximum Operating Pressure
RS Stock No. 286-6874
Mfr. Part No.58299
SGD3.17
Each (In a Pack of 5)
units
Glass Fibre Reinforced Plastic (GRP) Matte - 13mm 22mm G 1in +130°C -30°C -
RS Stock No. 283-3357
Mfr. Part No.59811
SGD15.65
Each
units
Aluminium Matte Anodised - 11mm 18mm G 1/2in +130°C -30°C -
RS Stock No. 871-2253
Mfr. Part No.VSTI10X1EDCF
BrandParker
SGD5.17
Each
units
Steel Zinc Plated Hollow Hex 8mm 12mm Metric - - - 400 bar
RS Stock No. 283-3290
Mfr. Part No.58621
SGD1.776
Each (In a Pack of 5)
units
Glass Fibre Reinforced Plastic (GRP) Matte - 11mm 18mm G 1/2in +130°C -30°C -
RS Stock No. 283-3329
Mfr. Part No.59791
SGD17.77
Each
units
Aluminium Matte Anodised - 9mm 15.5mm G 1/4in +130°C -30°C -
RS Stock No. 283-3385
Mfr. Part No.58295
SGD1.696
Each (In a Pack of 5)
units
Glass Fibre Reinforced Plastic (GRP) Matte - 9mm 16mm G 1/4in +130°C -30°C -
RS Stock No. 727-755
Mfr. Part No.VSTI1/2EDCF
BrandParker
SGD7.41
Each (In a Pack of 5)
units
Steel Zinc Plated - 14mm 19.3mm G 1/2in +100°C -30°C 400 bar
RS Stock No. 727-727
Mfr. Part No.VSTI1/8EDCF
BrandParker
SGD4.152
Each (In a Pack of 5)
units
Steel Zinc Plated - 8mm 12.3mm G 1/8in +100°C -30°C 400 bar
RS Stock No. 727-733
Mfr. Part No.VSTI1/4EDCF
BrandParker
SGD4.602
Each (In a Pack of 5)
units
Steel Zinc Plated - 12mm 17.3mm G 1/4in +100°C -30°C 400 bar
RS Stock No. 871-2262
Mfr. Part No.VSTI12x1.5EDCF
BrandParker
SGD7.00
Each
units
Steel Zinc Plated Hollow Hex 12mm 17mm Metric - - - 400 bar
RS Stock No. 498-334
Mfr. Part No.12PNK4S
BrandParker
SGD9.14
Each (In a Pack of 5)
units
Steel Yellow Chromated, Zinc Plated - - - G 3/4in +120°C -40°C 280 bar
RS Stock No. 727-749
Mfr. Part No.VSTI3/8EDCF
BrandParker
SGD6.428
Each (In a Pack of 5)
units
Steel Zinc Plated - 12mm 17.3mm G 3/8in +100°C -30°C 400 bar
RS Stock No. 914-9505
Mfr. Part No.59729
SGD20.06
Each
units
Aluminium Black Anodised - 11.5mm 44mm G 1in +100°C -30°C -
RS Stock No. 871-2269
Mfr. Part No.VSTI16x1.5EDCF
BrandParker
SGD8.84
Each
units
Steel Zinc Plated Hollow Hex 12mm 17mm Metric - - - 400 bar
RS Stock No. 283-3313
Mfr. Part No.58641
SGD3.358
Each (In a Pack of 5)
units
Glass Fibre Reinforced Plastic (GRP) Matte - 13mm 22mm G 1in +130°C -30°C -
RS Stock No. 283-3420
Mfr. Part No.58298
SGD2.574
Each (In a Pack of 5)
units
Glass Fibre Reinforced Plastic (GRP) Matte - 12mm 20mm G 3/4in +130°C -30°C -
RS Stock No. 283-3391
Mfr. Part No.58296
SGD1.696
Each (In a Pack of 5)
units
Glass Fibre Reinforced Plastic (GRP) Matte - 9mm 16mm G 3/8in +130°C -30°C -
RS Stock No. 498-306
Mfr. Part No.4PNK4S
BrandParker
SGD3.606
Each (In a Pack of 5)
units
Steel Yellow Chromated, Zinc Plated Hex Plug - - G 1/4in +120°C -40°C 450 bar
RS Stock No. 914-9498
Mfr. Part No.59723
SGD12.12
Each
units
Aluminium Black Anodised - 9mm 38.5mm G 3/8in +100°C -30°C -
RS Stock No. 283-3335
Mfr. Part No.59801
SGD17.89
Each
units
Aluminium Matte Anodised - 9mm 15.5mm G 3/8in +130°C -30°C -
Related Products
Female parallel thread blanking cap. Manufactured from steel ...
Description:
Female parallel thread blanking cap. Manufactured from steel to BS5200 with a zinc yellow chromated finish to give a high corrosion resistance (500 hours in salt spray test). All adaptors have a working temperature range -40 to +120°C (-3 to ...
Female parallel thread blanking cap. Manufactured from steel ...
Description:
Female parallel thread blanking cap. Manufactured from steel to BS5200 with a zinc yellow chromated finish to give a high corrosion resistance (500 hours in salt spray test). All adaptors have a working temperature range -40 to +120°C (-3 to ...
Hexagon headed male parallel thread blanking plug. Manufactured ...
Description:
Hexagon headed male parallel thread blanking plug. Manufactured from steel to BS5200 with a zinc chromated finish to give a high corrosion resistance (500 hours in salt spray test). All adaptors have a working temperature range -40 to +120°C (-3 ...
Made from glass-fibre reinforced technopolymerNBR synthetic rubber sealsSolvent, ...
Description:
Made from glass-fibre reinforced technopolymerNBR synthetic rubber sealsSolvent, oil, grease, chemical resistantMaximum working temperature 130°CGraphic function symbol on plug cap.