Ceiling Lights

A ceiling light is an electrical fitting containing a lamp or light bulb to provide an artificial light source in a room. Ensuring a workplace has adequate illumination is essential for employee health and safety. Substandard or insufficient lighting can lead to various complaints including eye-strain, headaches and fatigue. On the opposite end of the scale, too much light can also cause the same problems. Both can result in quality issues, low productivity and sometimes accidents can occur.


What ceiling light is best for me?


There are various types of ceiling fixture available, choosing the best one for an installation depends on a few key factors.


  • Natural light: Make the best use of existing natural light. Ensure that all windows and skylights are kept clean to allow as much natural light is utilised.

  • Application: Make sure that the correct type of ceiling lighting is installed for the job at hand. An office environment requires different lighting to a clothing factory containing sewing machines and fabric matching tables.

  • Positioning: Care must be taken when installing ceiling lighting. The correct positioning of lighting ensures that employees can safely carry out their daily tasks and not put themselves under any unnecessary strains.

  • Environment: Must ceiling light be Anti-corrosive or IP44 rated or above.

Whether you are installing office lighting, garage lighting, LED or fluorescent, industrial ceiling lights are the most likely. Some additional points to consider are;


Mounting type


  • Recessed or flush ceiling light: Enables the lamp to be mounted flush into the ceiling.

  • Surface mount: A simple way of fixing single or twin batten fluorescent or LED fixtures to the ceiling.

  • Pendant: A type of fitting that suspends the lamp a short distance from the ceiling.

  • Dimmable: Must the lighting be dimmable? If so extra ballasts and switching components must be used.

  • Diffusers: Used to spread and soften the light.

Colour Temperature


Colour temperature refers to a scale that measures the type of colour or hue that a lamp emits. The colour temperature scale is measured in Kelvins (K). The higher the K number the cooler the lamp. The lower the K number the warmer the lamp.


  • 2500K Extra warm white.

  • 2700K Warm white.

  • 3000K Warm white / White.

  • 3500K White.

  • 4000K Cool white.

  • 6500K Daylight.

...
Read more Read less

Filters

Viewing 1 - 20 of 241 products
Results per page
Description Price Type Length Width Depth Wattage Number of Lamps Colour Tone Lamp Type Colour Temperature Lamp Size Life Hours Colour Reference Voltage Rating Anti-corrosive
RS Stock No. 851-2933
BrandRS PRO
SGD45.26
Each
units
Twin Batten 610 mm 104 mm 75 mm 28 W 2 - Fluorescent - T5 - - 230 V No
RS Stock No. 851-3052
BrandRS PRO
SGD33.11
Each (In a Pack of 2)
units
Diffuser 1219 mm - - - 1 - Fluorescent - T5 - - - No
RS Stock No. 823-4854
Mfr. Part No.45333
BrandSylvania
SGD114.50
Each
units
Single Batten 1.312 m 102 mm 108 mm 36 W 1 - Fluorescent - T8 - - 230 V Yes
RS Stock No. 823-4860
Mfr. Part No.45336
BrandSylvania
SGD153.32
Each
units
Twin Batten 1.312 m 172 mm 108 mm 36 W 2 - Fluorescent - T8 - - 230 V Yes
RS Stock No. 851-2918
BrandRS PRO
SGD37.22
Each
units
Single Batten 610 mm 65 mm 75 mm 14 W 1 - Fluorescent - T5 - - 230 V No
RS Stock No. 851-2927
BrandRS PRO
SGD53.19
Each
units
Single Batten 1.21 m 65 mm 75 mm 28 W 1 - Fluorescent - T5 - - 230 V No
RS Stock No. 851-3006
BrandRS PRO
SGD42.35
Each
units
Single Batten 1.175 m 63 mm - 28 W 1 - Fluorescent - T5 - - 230 V No
RS Stock No. 122-3576
Mfr. Part No.4058075079915
BrandLEDVANCE
SGD105.10
Each
units
Batten 1.2 m 95 mm 78 mm 39 W 1 Cool White LED 4000K - 50000h - 230 V -
RS Stock No. 122-3580
Mfr. Part No.4058075079953
BrandLEDVANCE
SGD112.69
Each
units
Batten 1.5 m 95 mm 78 mm 55 W 1 Cool White LED 4000K - 50000h - 230 V -
RS Stock No. 851-3002
BrandRS PRO
SGD31.03
Each
units
Single Batten 575 mm 63 mm - 14 W 1 - Fluorescent - T5 - - 230 V No
RS Stock No. 851-2936
BrandRS PRO
SGD62.55
Each
units
Twin Batten 1.21 m 104 mm 75 mm 56 W 2 - Fluorescent - T5 - - 230 V No
RS Stock No. 851-3021
BrandRS PRO
SGD58.03
Each
units
Single Batten 1.475 m 63 mm - 49 W 1 - Fluorescent - T5 - - 230 V No
RS Stock No. 918-1111
BrandRS PRO
SGD154.12
Each
units
Batten 1.791 m 61 mm 64 mm 50 W 1 Cool White LED 4000K T8 - - - No
RS Stock No. 125-0608
Mfr. Part No.45174
BrandSylvania
SGD214.70
Each
units
Single Batten 1.505 m 66 mm 76 mm 39 W 1 Cool White Integrated LED 4000K T8 - - 240 V -
RS Stock No. 875-0198
BrandRS PRO
SGD1.027
Each (In a Pack of 20)
units
Stainless Steel Clip - - - - - - - - - - - - No
RS Stock No. 122-7972
Mfr. Part No.910500453335
SGD120.23
Each
units
Single Batten 661 mm 87 mm 96 mm 17 W 1 Cool White LED 4000K - - - 240 V -
RS Stock No. 851-3059
BrandRS PRO
SGD41.11
Each (In a Pack of 2)
units
Diffuser 610 mm - - - 1 - Fluorescent - T5 - - - -
RS Stock No. 823-4850
Mfr. Part No.45332
BrandSylvania
SGD109.73
Each
units
Single Batten 702 mm 102 mm 108 mm 18 W 1 - Fluorescent - T8 - - 230 V Yes
RS Stock No. 851-3028
BrandRS PRO
SGD43.93
Each
units
Twin Batten 574 mm 63 mm - 28 W 2 - Fluorescent - T5 - - 230 V No
RS Stock No. 851-3046
BrandRS PRO
SGD85.01
Each
units
Twin Batten 1.475 m 63 mm - 94 W 2 - Fluorescent - T5 - - 230 V No
Related Products
The Ledvance Surface Circular luminaire are modern replacement ...
Description:
The Ledvance Surface Circular luminaire are modern replacement lighting solutions for fluorescent surface luminaires and offer excellent uniformity and easy quick installation. They are extremely efficient at 80 lumens per watt and you can save up to 55% of the ...
S WP BATTEN LED EM M 4500L MDECT. ...
Description:
S WP BATTEN LED EM M 4500L MDECT. FeaturesAC/EM unit3 year warrantyTypically 4,500 lumens on mains AC operation, 350 lumens in emergency operationCeiling, wall mount or suspension mounting (wall mount requires optional 45o mounting brackets)Higher wall mount classification using optional ...
Ledvance Damp Proof Slim Value luminaires are the ...
Description:
Ledvance Damp Proof Slim Value luminaires are the ideal lighting solution for Industrial use and thanks to its slim housing design and easy access to electrical terminal ends caps with clip mechanism the luminaires are suitable for environment such as ...
Evenly distributed lightEnergy savings of up to 50 ...
Description:
Evenly distributed lightEnergy savings of up to 50 % (compared to luminaires that use fluorescent lamps)Easy installation, no tools required for connection5 years guaranteeHigh luminous efficacy: up to 115 lm/WBeam angle: 105°ApplicationIndustrial and storage facilitiesCar parks and underpassesGaragesWorkshops, ...