Heatsink Mounting Accessories

Heatsink mounting accessories support the attachment of heatsinks to their components. Heatsinks are passive heat exchangers: they take the heat generated by electrical or mechanical devices and transfer it to a disposable medium, often liquid coolant or air. There's a wide selection of heatsink mounting accessories, including clips, adhesive tape, retaining springs, hi-flow insulators and graphite pads. Choosing the right mounting accessories can improve your heatsink’s performance.

Types of heatsink mounting accessories

A range of heatsink mounting accessories is available, depending on your needs. Spring clips can be used with all sizes of vertical-mount heatsinks where transistors have no mounting tabs. Heatsink spring mount rivets are used to fasten a heatsink to a processor on a printed circuit board. They provide continuous pressure to a heatsink to improve the conductivity. For an alternative to screw mounting and clip mounting, adhesive tape allows a double-sided high bond-strength attachment.

Why use heatsink mounting accessories?

Heatsink mounting accessories provide greater reliability within your cooling system and ensure it can operate to its best ability. The right accessories can also contribute to reduced energy use and lower costs.


...
Read more Read less

Filters

Viewing 1 - 20 of 63 products
Results per page
Description Price Accessory Type For Use With
RS Stock No. 707-4815
BrandRS PRO
SGD19.85
Each
units
Thermal Interface Tape Heatsink
RS Stock No. 263-239
BrandRS PRO
SGD2.52
1 Kit
Kit(s)
Transistor Mount Kit TO-3
RS Stock No. 712-8225
BrandRS PRO
SGD2.43
1 Kit
Kit(s)
Transistor Mount Kit TO-220
RS Stock No. 298-493
BrandRS PRO
SGD4.81
Each
units
Transistor Mount Kit SO-55, TO-3, TO-66
RS Stock No. 298-500
BrandRS PRO
SGD2.01
Each
units
Transistor Mount Kit SOT-93, TO-126, TO-128, TO-202, TO-220, TO-3P
RS Stock No. 707-4828
BrandRS PRO
SGD27.26
Each
units
Thermal Interface Tape Heatsink
RS Stock No. 707-4819
BrandRS PRO
SGD18.97
Each
units
Thermal Interface Tape Heatsink
RS Stock No. 131-1216
BrandRS PRO
SGD0.404
Each (In a Pack of 5)
units
Gull Wing Clip TO-220
RS Stock No. 131-1238
BrandRS PRO
SGD0.774
Each (In a Pack of 5)
units
Spring Clip TO-218, TO-220, TO-247, TO-3P
RS Stock No. 485-8881
BrandRS PRO
SGD1.388
Each (In a Pack of 5)
units
Gull Wing Clip TO-3P
RS Stock No. 485-8897
BrandRS PRO
SGD1.40
Each (In a Pack of 5)
units
Gull Wing Clip TO-220
RS Stock No. 329-3299
Mfr. Part No.HF625-0.005-00-1212
BrandBergquist
SGD106.35
Each
units
Hi-Flow Insulator Heatsink
RS Stock No. 402-456
Mfr. Part No.W4605 KIT
BrandWinslow
SGD4.33
1 Kit
Kit(s)
Transistor Mount Kit TO-220
RS Stock No. 754-5945
Mfr. Part No.HSR-1
BrandRichco
SGD11.75
1 Bag of 20
Bag(s)
Spring Mount Rivet Heatsink
RS Stock No. 362-9711
Mfr. Part No.MIXING NOZZLE 50CC
BrandBergquist
SGD6.39
Each
units
Gap Filler Mixing Nozzle Insulators
RS Stock No. 354-9025
Mfr. Part No.HF-S43
BrandSunhayato
SGD11.04
1 Bag of 3
Bag(s)
Double Sided Tape Heatsink
RS Stock No. 477-4878
Mfr. Part No.BP100-0.005-00-00-25
BrandBergquist
SGD1.615
Each (In a Pack of 10)
units
Adhesive Tape Heatsink
RS Stock No. 774-2758
Mfr. Part No.KL 35 100
SGD5.83
Each
units
Clip DIN Rail
RS Stock No. 504-0592
Mfr. Part No.THFM1
SGD0.244
Each (In a Pack of 10)
units
Retaining Spring TO-218, TO-220, TO-247, TO-264
RS Stock No. 477-4862
Mfr. Part No.BP100-0.005-00-00-50
BrandBergquist
SGD4.217
Each (In a Pack of 10)
units
Adhesive Tape Heatsink
Related Products
Dry thermally conductive graphite washers for use where ...
Description:
Dry thermally conductive graphite washers for use where electrical conductivity together with excellent heat transfer are requiredThermal performance is comparable to that of metal-oxide-filled silicone grease but with no shrinkage or drying out over long periods of timeLow electrical resistance ...
Transistor spring clips designed for single point fixing ...
Description:
Transistor spring clips designed for single point fixing of power transistors such as TO220, TO218, TO247 and TO3P to their heatsinksThey provide strong central pressure (max. 7.5kg) to maximise the thermal transfer properties to the heatsink with only one circular ...
In some applications, the GAP Pad exerts a ...
Description:
In some applications, the GAP Pad exerts a pressure unable to cope with risks of deterioration. For other applications, it is impossible to apply due to inaccessibility. To solve these problems, Bergquist has created a "GAP Pad liquid", thermal filler ...
Bond-Ply 100 is thermally conductive, double-sided pressure sensitive ...
Description:
Bond-Ply 100 is thermally conductive, double-sided pressure sensitive adhesive tape. It is designed to attain high bond strength with long term exposure to moderate heat and high humidity. Can be used instead of Heat Cure Adhesives, Screw Mounting, Clip Mounting. ...