Cynergy3 RSF50 Series Vertical Polypropylene Float Switch, Float, 1m Cable, NO/NC, 240V ac Max, 120V dc Max
- RS Stock No.:
- 338-9772
- Mfr. Part No.:
- RSF54Y100RC
- Manufacturer:
- Sensata / Cynergy3
9 In stock for delivery within 1 working days
Added
Price Each
Was SGD37.59
You pay
SGD35.71
(exc. GST)
SGD38.92
(inc. GST)
Units | Per unit |
1 - 5 | SGD35.71 |
6 - 29 | SGD35.01 |
30 + | SGD28.82 |
- RS Stock No.:
- 338-9772
- Mfr. Part No.:
- RSF54Y100RC
- Manufacturer:
- Sensata / Cynergy3
Legislation and Compliance
- COO (Country of Origin):
- GB
Product Details
Vertical Float Switches
The RSF50 series of compact vertical float switches have a single switching point, mounting is either from the top or bottom of the tank therefore access to the inside of the tank is required. These float switches are ideal for vending machine, printing systems, and chemical dosing applications.
Features & Benefits
Manufactured in a variety of materials with a choice of gasket materials to suit most commonly used liquids
Mounting in top or bottom of tank
N/O versions can be configured as N/C by float inversion
All units WRAS approved for use in hot and cold water
Mounting in top or bottom of tank
N/O versions can be configured as N/C by float inversion
All units WRAS approved for use in hot and cold water
Note
Part numbers ending in '1/8' have a 1/8"NPT mounting thread
Part numbers ending in 'C' have an M12 mounting thread
Part numbers ending in 'C' have an M12 mounting thread
Warning
The cable entry point must NOT under any circumstances be submerged.
On the Horizontal switches they must be fitted through the wall of a tank so that the cable is on the outside.
On the Vertical type the mounting thread and cable entry must be above the highest level of the liquid.
On the Horizontal switches they must be fitted through the wall of a tank so that the cable is on the outside.
On the Vertical type the mounting thread and cable entry must be above the highest level of the liquid.
Supplied with
epoxy sealed leadouts
Sensata Cynergy3 Vertical Float Switch with Nitrile Gasket, 1m, NO/NC - RSF50 Series - RSF54Y100RC
Be aware of the level of fluid in your tank or sump with this efficient Sensata Cynergy3 float switch. Changes in liquid level cause the float to move which brings the magnet into close proximity with the reed switch. This triggers an open or closed circuit, usually to control liquid flow from a pump. Typical applications for this compact device include vending machines, printing systems and chemical dosing equipment. It can be fitted to the top or bottom of your tank to suit your access needs.
Features & Benefits
• NO (normally open) or NC (normally closed) options for flexibility in designing your electrical circuit
• Wide operating temperature range of -20°C to +100°C for use in a variety of environments
• Standard M12 mounting thread for universal connections
• 1m cable gives connection flexibility when installing
• Wide operating temperature range of -20°C to +100°C for use in a variety of environments
• Standard M12 mounting thread for universal connections
• 1m cable gives connection flexibility when installing
Does this Sensata Cynergy3 float switch only work in one direction?
To make it a versatile option, the action of this versatile switch can be reversed. Just remove the float from the stem, invert it, then refit it securely.
Specifications
Attribute | Value |
---|---|
Device Type | Float |
Mounting Type | Vertical |
Switch Output | NO/NC |
Body Material | Polypropylene |
Cable Length | 1m |
Minimum Operating Temperature | -20°C |
Maximum Operating Temperature | +100°C |
Maximum AC Voltage | 240V |
Maximum DC Voltage | 120V |
Maximum Current | 600 mA |
Gasket Material | Nitrile |
Series | RSF50 |
Current Rating | 600 mA |
Standards Met | NSF Approved, WRAS |