Murata DLW31S Series Type 1206 Wire-wound SMD Inductor ±25% Wire-Wound 260mA Idc

  • RS Stock No. 724-1683
  • Mfr. Part No. DLW31SN601SQ2L
  • Manufacturer Murata
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): JP
Product Details

Murata 1206 DLW31S Series SMD Common Mode Chokes

DLP31S series common mode choke coil chips with high impedance in a small package. The DLP31S series utilise ferrite material technology and film processing technology to give excellent performance at high frequency ranges and is suitable for differential signal line application.

Small size, low profile, SMD. 3.2x1.6x1.15mm (Tolerance: +-0.15mm)
High common mode impedance (550 ohm at 100MHz typ.) in small size
Suppresses high frequency noise that was unable to be suppressed with existing common mode choke coils
Suitable for differential signal lines like USB, because DLP31S does not provide distortion to high speed signal transmission due to its high coupling (coupling coefficient: 0.98 min.)

Applications

USB lines of PCs, peripheral equipment
LVDS lines of Note-PCs, LCDs
USB lines of digital AV equipment such as digital cameras

//media.rs-online.com/t_line/L0105962-10.jpg

Murata SMD Common Mode Chokes

Specifications
Attribute Value
Maximum DC Current 260mA
Package/Case 1206 (3216M)
Length 3.2mm
Depth 1.6mm
Height 1.9mm
Dimensions 3.2 x 1.6 x 1.9mm
Tolerance ±25%
Maximum DC Resistance 800mΩ
Series DLW31S
Inductor Construction Wire-Wound
Maximum Operating Temperature +85°C
Minimum Operating Temperature -40°C
Discontinued product
Related Products
SPM Series Magnetic Shield Type Wound Inductors for ...
Description:
SPM Series Magnetic Shield Type Wound Inductors for power circuits are low profile products. Those wirewound surface mount inductors offer low inductance variance in high-temperature environments with good DC superimposition characteristics. Magnetic shield type inductor for power circuits using a ...
Ultra low RDC and RACHighest possible saturation current ...
Description:
Ultra low RDC and RACHighest possible saturation current based on FerriteSuitable for switching frequency up to 10MHzTemperature dependent parameter available on RedexpertOperating Temperature from -40°C to +125°C / +150°CTypes- WE-PD: Since always with low loss material, tight tolerances and high ...
SMD wound coil inductors suitable for a wide ...
Description:
SMD wound coil inductors suitable for a wide range of signal line applicationsHigh Q factor ensures sharp frequency responseHighly heat resistant thermoplastic resin exterior packageOperating temperature range -40°C to +105°CApplications include: TVs, VCRs, digital cameras, xDSL, car audio, ECU systems, ...
HCM1104 Series Magnetically shielded and low EMI SMD ...
Description:
HCM1104 Series Magnetically shielded and low EMI SMD power inductors utilising a powder iron core material. The HCM1104 Series inductors design enables a high current carrying capacity, low core losses and a maximum total operating temperature of 125 °C. Applications ...