3 kW Water Heater with Aqualoy Heating Element, Thermostat Included, 240 V

  • RS Stock No. 467-6825
  • Manufacturer RS PRO
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): GB
Product Details

Domestic Heater Elements - Aqualoy

Hot water is an essential part of everyday life and to have a precise temperature control and delivery on demand can be crucial. This RS Pro 2 1/4 inches BSP immersion heater Aqualoy variant is best suited for more aggressive water areas. Lime scale build up can be an issue and can affect the efficiency of the heater. This dual cut out immersion heater features a rod thermostat and a separate, secondary manual reset safety cut out.

Features and Benefits

Suited to more aggressive water area
Supplied complete with rod thermostat
Secondary manual reset

Features and Benefits

Hot water is an essential part of everyday life and to have a precise temperature control and delivery on demand can be crucial. Immersion heaters are electric heating elements that are found in water cylinders to heat water. These elements perform like a kettle to heat the surrounding water in the cylinder. One key advantage of an immersion heater element within your heating system is that if the boiler fails, you should still be able to get hot water. The element usually has its own power supply which means that it can be turned on and off when needed so that water is not constantly being heated unnecessarily.

• Hot water heating

FAQs

How do water heater elements work?
A water heating element is a pair of upper and lower heating elements that fit into a water heater of some sort. An electric current is passed through the elements which then heats the cold water.



What causes water heater elements to burn out?
Below are some causes:

  • Power surge - a sudden voltage increase to the element caused by a power surge can be enough to burn out an element.

  • Wires - a bad connection can cause an element to stop working.

  • Thermostat tripping out- these have a high limit switch that shuts off power to the elements when temperatures exceed normal.

  • Minerals - sediment collects at the bottom of the water heater tank, encasing the lower element. Forced to work harder, the element eventually fails.

  • Air pockets - these allow the upper element to burn while not immersed in water, resulting in failure.

Approvals

WRAS
BEAB
CE

Standards

EN 60335-2-73

Specifications
Attribute Value
Tank Heater Type Immersion
Power Rating 3 kW
Heating Element Material Aqualoy
Immersed Length 27in
Thermostat Included Yes
Supply Voltage 240 V
Stock check temporarily unavailable - call for stock availability
Price Each
SGD 79.48
(exc. GST)
SGD 85.04
(inc. GST)
units
Per unit
1 +
SGD79.48
Related Products
The high performance Drum Heater is designed for ...
Description:
The high performance Drum Heater is designed for melting or reducing the viscosity of products that require aggressive heating or high temperatures for handling. It is used to achieve product temperatures at multiple levels up to 220°C. The heater jacket ...
Designed to be mounted under sinks, will provide ...
Description:
Designed to be mounted under sinks, will provide a cost effective solution where there are one or more outlets to supply. Ideal for mixer taps.,10 litre: will supply 3 basins with spray taps, or 2 basins with ordinary taps.,15 litre: ...
The EW has been designed to provide stored ...
Description:
The EW has been designed to provide stored hot water from a mains pressurised water supply, where there''s no requirement for a temperature/pressure relief device, making installation simple. Hot water to up to four outletsBalanced supply of hot and cold ...
Redring Powerstream Eco instantaneous hand wash water heaters. ...
Description:
Redring Powerstream Eco instantaneous hand wash water heaters. Available in 2 power ratings: 9.5kW (RS 124-3835) or 10.8kW (RS 124-3836). Power selection control: high, eco, low and cold; allowing for seasonal adjustment for economy and comfort in useA Rated energy ...