Washroom Water Heater Redring 47789401, 15L 3kW 240 V

  • RS Stock No. 124-1515
  • Mfr. Part No. 47789401
  • Manufacturer Redring
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): GB
Product Details

EW Undersink Water Heaters

The EW has been designed to provide stored hot water from a mains pressurised water supply, where there''s no requirement for a temperature/pressure relief device, making installation simple.

Features and Benefits

Hot water to up to four outlets
Balanced supply of hot and cold water
Heat loss minimisation and energy savings from short pipe runs and superior insulation
Water outlet via existing tap or mixer
Adjustable thermostat to 70°C
Compact shape for undersink mounting
Remote siting possible
2.7 kW loading
Safety Features:
Over-temperature safety cut-out
6bar expansion relief valve
On/off neon light

Hot Water

Specifications
Attribute Value
Water Capacity 15L
Power Rating 3kW
Supply Voltage 240 V
Connection 1/2 in BSP
Maximum Working Pressure 12 bar
Thread Size 1/2in
Thread Standard BSP
Product Depth 300mm
Maximum Operating Temperature +70°C
Product Height 360mm
Type Unvented Water Storage Heater
11 In stock for delivery within 4 working days
Price Each
SGD 397.25
(exc. GST)
SGD 425.06
(inc. GST)
units
Per unit
1 +
SGD397.25
Related Products
Heaters specifically intended for anti-condensation and frost protection ...
Description:
Heaters specifically intended for anti-condensation and frost protection in control and equipment cabinets. All types are supplied with DIN rail mounting hardware. Snap-fastening onto 35 mm support rails EN 50 022 or direct screw-fastening onto the mounting platePTC technology with ...
The fruit of much work with plumbing contractors ...
Description:
The fruit of much work with plumbing contractors and manufacturers of hot water storage heaters, the SFR will be of great interest to professionals and fully meet the most demanding expectations. Advantages:Fast filling rate of more than 4000 L/h under ...
SFR 3/4 Stainless steel for calcareous, hard and ...
Description:
SFR 3/4 Stainless steel for calcareous, hard and aggressive waters: This « top-of-the-range », safety group features a stainless steel seat to prevent corrosion from impairing the valve seal. SFR Stainless steel is recommended especially where water is aggressive, hard ...
Characteristics identical to the SFR Stainless steel but ...
Description:
Characteristics identical to the SFR Stainless steel but with orientable discharge port air gap. Particularly adapted to the "stable" or "horizontal" hot water storage heaters because in this configuration of installation the valve is more subjected to the risks of ...